Low Carbon Galvanized Steel Wire Corrosion Resistance For Chain Link Fence
Galvanized steel wire for chain link
Galvanized steel wire for chain link is a soft, heavily Zinc coated wire used in the chain link, gabion and various kinds of mesh industry protection.
Low carbon galvanized wire for chain link are produced to meet the requirements of BS EN 10244; ASTM_A_641(zinc-coated) etc. The specification can be made by customer's requirement.
The diameter of the wire is available from 1.7mm to 8.0mm and is available in either coils or stems.
Wire Specifications
Diameter Tolerances
|
Nominal Wire Diameter |
Tolerance (mm) |
|
over 0.80mm up to and incl. 1.60mm over 1.60mm up to and incl. 2.50mm over 2.50mm up to and incl. 4.00mm over 4.00mm up to and incl. 5.00mm over 5.00mm up to and incl. 8.00mm |
+/-0.03 +/-0.03 +/-0.03 +/-0.04 +/-0.04 |
Galvanised Coating Weight - AS3863; EN 10244; ASTM A 641
| Wire Diameter (mm) |
Wire Diameter (inch) |
Minimum Ctg Mass Class 1 (g/m2) | Minimum Ctg Mass Class 2 (g/m2) | Minimum Ctg Mass Class 3 (g/m2) |
| 2.41 | 0.095 | 90 | 245 | 365 |
| 2.68 | 0.106 | 90 | 245 | 365 |
| 2.74 | 0.108 | 90 | 245 | 365 |
| 2.79 | 0.110 | 90 | 245 | 365 |
| 3.38 | 0.133 | 90 | 245 | 365 |
| 3.4 | 0.134 | 90 | 245 | 365 |
| 3.68 | 0.145 | 90 | 245 | 365 |
Tensile Strength (MPa)
The tensile strength is defined as the maximum load achieved in a tensile test divided by the cross sectional area of the wire test piece. The tensile strength range for Armouring Wire is 448-517 MPa; 551-620 MPa; 65000psi~75000psi;80000psi~90000psi
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.