China FR1 100G Optical Module QSFP28 Transceiver Module 1310nm 2KM Duplex LC Connector for sale

FR1 100G Optical Module QSFP28 Transceiver Module 1310nm 2KM Duplex LC Connector

Price Negotiable

Price: Negotiation

MOQ: 1 pcs

Delivery Time: 7 Working days

Brand: E-link

Product Description

Fiber SFP Module 100GBASE-FR1 QSFP28 1310nm 2KM Transceiver Duplex LC Connector
Optical Transceiver Module Advantages
► Hermetically sealed TO Based design

► Supporting 2km reach of single mode fiber

► Compliant with QSFP28 Standard: SFF-8636 Rev 2.10a

► Compliant with IEEE802.3cu D3.2 100GBASE- FR1

Absolute Maximum Ratings

Parameter	Symbol	Min.	Max.	Unit	Notes
Storage Temperature	TS	-40	+85	ºC
Supply Voltage	VCC	-0.3	3.6	V
Relative Humidity (non-condensing)	RH	5	95	%
Data Input Voltage – Differential	lVDIP-VDINl	-	1.0	V
Control Input Voltage	VI	-0.3	Vcc+0.3	V
Control Output Current	IO	-20	20	mA

Recommended Operating Conditions

Parameter	Symbol	Min.	Typical	Max.	Unit	Notes
Operating Case Temperature	TOPR	0	-	70	ºC
Power Supply Voltage	VCC	3.135	3.3	3.465	V
Instantaneous peak current at hot plug	ICC_IP	-	-	1600	mA
Sustained peak current at hot plug	ICC_SP	-	-	1320	mA
Maximum Power Dissipation	PD	-	-	4	W
Maximum Power Dissipation, Low Power Mode	PDLP	-	-	1.5	W
Signalling Rate	SR	-	53.125	-	GBd
Control Input Voltage High	VIH	VCC*0.7	-	VCC+0.3	V
Control Input Voltage Low	VIL	-0.3	-	VCC*0.3	V
Two Wire Serial Interface Clock Rate	-	-	-	400	kHz

Digital Diagnostics

Parameter	Range	Accuracy	Unit	Calibration
Temperature	0 to 70	±3	ºC	Internal
Voltage	0 to VCC	±3%	V	Internal
Tx Bias Current	0 to 100	±10%	mA	Internal
Tx Output Power	-3.1 to +4	±3	dB	Internal
Rx Receive Power	-7.1 to +4	±3	dB	Internal