1310nm Gigabit Fiber Ethernet Media Converter SFP Slot With DIP Switch
10/100/1000M Gigabit Ethernet Media Converter SFP Slot with DIP Switch
Model: LNK-3011SFP Series
Overview
The LNK-3011SFP is equipped with one 10/100/1000Base-T port and one Gigabit SFP slots to support conversion between 10/100/1000Base-T and 1000Base-X network.
The dual SFP slots make the Ethernet signals connect easily and efficiently by adding single-mode or multi-mode media modules or the combination of both types.
The LNK-3011SFP provides high reliability and flexibility to extend the media transmission distance up to 550m,10km or longer, depending on the optional 1000Base-SX / LX SFP transceiver modules.
Technical Indexes
|
Parameter
|
Specifications |
|
Access mode
|
10/100/1000Mbps Gigabit Ethernet |
| Standard | IEEE802.3 10Base-T Ethernet, IEEE802.3u 100Base-TX/FX Fast Ethernet, IEEE802.3ab 1000Base-T , IEEE802.3z 1000Base-SX/LX Gigabit Ethernet |
|
Wavelength
|
850nm/1310nm/1550nm |
| Transmission distance |
50/125μm or 62.5/125μm multi-mode fiber cable provides up to 220 & 550 meters 9/125μm single-mode cable provides long distance of 10/ 15/ 20/ 30/ 40/ 50/ 60/ 70/ 120km (vary on SFP module) |
| Port |
Copper: 1 x 10/100/1000Base-T port Fiber: 1 x 1000Base-X SFP slots |
|
|
|
|
Conversion means
|
Store and Forward mode or Cut-Through mode |
|
Buffer space
|
Built in 128Kb RAM for data buffer |
|
Flow control
|
Full duplex: flow control; Half duplex: back pressure |
|
BER
|
<19-9 |
|
MTBF
|
100,000 hours |
| LED indicator | PWR (power supply), 1000M (UTP Port Speed), LNK/ACT FX (Fiber Port Link/Action Status), LNK/ACT TX (UTP Port Link/Action Status), SD (Fiber Signal Status), FDX/COL (UTP Port Full Duplex) |
|
Power supply
|
External: AC90~264V/DC100~380V input, 5V1A output |
|
Power consumption
|
<40W (the chassis at full load), <2W |
|
Operating temperature
|
0~70ºC |
|
Operating humidity
|
5%~90% |
|
Maintaining temperature
|
-45~80ºC |
|
Maintaining humidity
|
5% ~ 90% non-condensing |
Features
- Support inter-conversion between adaptive 10Base-T/100Base-TX/1000Base-T with 1000Base-SX/LX
- Use Port 10/100/1000Base-TX (RJ45), 1000Base-SX/LX (SFP slot)
- Support DIP Switch Function
- Support full-duplex and half-duplex and its auto-sensed
- Support auto-sense of MDI/MDI-X, facilitating system commissioning and installation
- Support the transmission of extra-long VLAN packets
- Support Quality of Service (QoS) and ensuring the transmission of VoIP packets;
- Support Jumbo Frame (64-9216 Byte)
- Support LFP(Link fault pass through) Function
Application
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.