Mc101xl / Mc102xl Fiber Ethernet Media Converter Single Mode 20km Distance , SC BIDI
Model: LNK-S1100-25
Overview
Due to its unique function of link failure alert between electrical port and optical one, the intelligent 10/100M adaptive fast Ethernet media converter can replace the media converter with network management to greatly reduce the system cost.
LNK-1100 Ethernet media converter can interconvert electrical signals of 10BaseT and 100BaseTX twisted pairs with optical signals of 100BaseFX.
It extends the network transmission distance from 100m via copper cables to 2km via fiber optical cable.
It enables the data to transmit in two different mediums of electrical and optical networks either by the technology of data link L2 store-and-forward, or by the one of PHY L1 cut-through).
It supports transmission in multi-mode dual fiber, single mode dual fiber and single mode single fiber.
Technical Indexes
|
Parameter
|
Specifications |
|
Access mode
|
10/100Mbps |
| Standard | IEEE802.3 10Base-T Ethernet, IEEE802.3u,100Base-TX/FX Fast Ethernet, IEEE802.3x Flow control |
|
Wavelength
|
850nm/1310nm/1550nm |
| Transmission distance |
Single fiber single mode: 20/40/60/80/100 km
Category-5 twisted pairs: 100m |
| Port |
One RJ45 port: for connecting STP/UTP category-5 twisted pairs
One optical port: Single mode Single fiber: SC or FC (9/125μm) |
|
Conversion means
|
Store and Forward mode or Cut-Through mode |
|
Buffer space
|
Built in 128Kb RAM for data buffer |
|
Flow control |
Full duplex: flow control;
Half duplex: back pressure |
|
BER
|
<19-9 |
|
MTBF
|
100,000 hours |
| LED indicator |
POER (power supply); FX LINK/ACT (optical link action); FDX (FX full duplex), TX LINK/ACT (TP cable link/action); TX 100 (TP cable rate 100M), FX100(fiber cable rate 100M) |
|
Power supply |
External: AC90~264V/DC100~380V input, 5V1A output
Internal: AC90~264V/DC100~380V input |
|
Power consumption
|
<40W (the chassis at full load), <2W |
|
Operating temperature
|
-10~55ºC |
|
Operating humidity
|
5%~90% |
|
Maintaining temperature
|
-40~70ºC |
|
Maintaining humidity |
5% ~ 90% non-condensing
|
Features
- 10/100Mbps auto-sensed, facilitating network upgrade
- Built-in efficient switching core to implement flow control and reduce broadcast packets
- full-duplex and half-duplex auto-sensed
- Supporting auto-sense of MDI/MDI-X, facilitating system commissioning and installation
- Supporting Link Failure Alert (LFA) optional
- Supporting half /full-duplex of FX and link failure alert with optional dip-switch
- Supporting 10/100Mbps store-and-forward and 100Mbps cut-through transmission with optional dip-switch
- Supporting the transmission of 100Base-Fx or STM-1, compatible with other devices
- Supporting low-time lag transmission
- Supporting the transmission of extra-long packets up to1600 bytes
- Supporting the transmission of extra-long VLAN packets
- Supporting Quality of Service (QoS) , ensuring the transmission of VoIP packets
- Extremely low power consumption (less than 2W), low heat, reliable and stable performance, and long lifetime;
- Options in single mode dual fiber, multi-mode dual f fiber, and single mode in single fiber
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.