48 Volt 2 Port Cisco POE Power Over Ethernet Injector 10 / 100 / 1000Mbps 15.4W
10/100/1000Mbps 48V 15.4W POE Injector for POE IP Camera
Model: LNK-POE300
Overview
The LNK-POE200/LNK-POE300 Power over Ethernet (PoE) adapter is designed to supply operational power to surveillance cameras and wireless LAN devices such as access points, bridges and routers. It enables power current to travel on the Ethernet network cable, thus eliminates the need to directly connect a power supply to the wireless LAN device. Power and Data are combined on a single cable, thus eliminating the need for extra power lines and also reducing installation costs and manpower.
Features
- Up to 15.4W/25.5W of PoE Power
- Fully IEEE802.3af/IEEE802.3at compliant
- Supports 10/100M or 10/100/1000M LAN environment
- Plug & Play
- No configuration required
- Reduced Installation cost
- Safe and Reliable Power to WLAN Access Points
- Automatic Detection and Protection of Non–standard Ethernet Terminals
Technical Parameters
| Parameter | Specifications |
| Features |
• Conforms to IEEE802.3af standard RJ-45 • Conforms to IEEE802.3af standard RJ-45 |
|
• Data Input Interface RJ-45 10/100Base-TX/ • Data Input Interface RJ-45 10/100/1000Base-TX |
|
| • Output Port Power Cable Included | |
| Data Rate |
10/100Mbps 10/100/1000Mbps |
| Input Power | 90-240V AC ,50-60Hz |
| Output Power |
15.4W Max IEEE802.3af 30W Max IEEE802.3at |
| Wiring | • Data provide over pairs 1/2(+) and 3/6(-) |
| • Power over spare pairs 4/5(+) and 7/8(-) | |
| LED Display | YES |
| Operating Temperature | 0 to +40°C, |
| Humidity | Max. 95% RH(non-condensing) |
| Dimension | 61×40×12(H×D×W) |
| Weight | 200g |
Application
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.