Standalone Fiber Ethernet Media Converter 3R Repeater XFP To XFP Web Management
Standalone Web-Smart 10G OEO Converter 3R Repeater XFP to XFP
Model: LNK-OEO-xx
Overview
E-link Standalone 10G OEO Converter (3R Repeater) with SFP+ to SFP+ Slot, XFP to XFP Slot, SFP+ to XFP Slot optional , which uses optical -electricity – optical conversion principle to realize optical signal regeneration , enabling of the optical signal amplification and regeneration , re-timing, and wavelength conversion , with coarse / dense wavelength division multiplexing together to realized WDM transmission . It is now possible to quickly improve communication capacity , expand the bandwidth on present network , while using low-cost, high cost-effective solutions to manage and run the system , easy operation.
Features
- 3R Repeater,
- Support Jumbo Frame
- Transparent Transport and very low delay
- Support ITUT prescribed DWDM/CWDM wavelength
- Support DMI function for SFP+/XFP fiber module
- Support Loopback test function
- Support Web management
- Full State Led display
- Easy installation
Technical Indexes
| Transmission Speed | 10Gb/s (9.95Gb/s-11.35Gb/s) |
| Protocols | IEEE802.3ae (10Gbase-SR/LR/ER/ZR/LRM) |
| Access Type | 10G LAN/ 10G WAN |
| Interface Type |
A Type: SFP+ To SFP+ B Type: SFP+ To XFP C Type: XFP To XFP |
| Transmission Distance |
SFP+ module: Up to 80Km XFP module: Up to 80Km |
|
Maximum Packet Forwarding Rate |
14,880,950/S |
|
Network management information: |
SFP+ or XFP fiber module detection SFP+ or XFP fiber module DMI function(Temperature , Voltage , Optical power) Link status detector Enable/Disabled Loopback test function Rate select (10Gbase-Lan or Wan) |
| power requirement |
Standalone: AC 220V OR DC -48V Power consumption: ≤6W |
| Work Environment |
Operating Temp: 0~ 50 ℃ Storage Temp: -10~ 70 ℃ Humidity: 5%~90% non-condensing |
| Dimension | Standalone: 173mm × 106mm× 33mm |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.