5 Port 10 / 100M Ethernet POE Switch 1 x 60W High Power PoE Port 1 x SC Fiber Uplink
5 Port 10 / 100M Ethernet POE Switch 1 x 60W High Power PoE Port 1 x SC Fiber Uplink
Model: LNK-HP1460 series
Overview
This LNK-HP1460 series switch provides a network point for power supply and datad transmission.
All the 4 Ethernet ports can be connected with 10/100Mps quickly. The uplink port optical fiber SC interface. 1-4 port can provide power supply with IEEE 802.3af standard, among which 1 port supports super high power 60W for each.
The advanced self-sensing algorithm supply power for IEEE802af terminal unit only, avoiding damaging proprietary PoE or non-PoE standard equipment.
In addition, it will stop power supply when PoE devices are not connected. In short, this switch features simple and reliable design, automatic identification PoE requirements, duplex and high-speed.
This cost-effective LNK-HP1460 series switch provide network layout need to simplify wireless access point (AP) and IP-based surveillance cameras network cameras in order to install in commercial network and home network.
The devices far away from power socket are very suitable for hanging on the wall or ceiling. PoE eliminates the need for connecting these devices to power socket.
So it make more flexible for those difficult to connect with AC power socket, and cut down the installation cost.
Technical Indexes
| Technical parameter list | |
| Product Name | 4 Port Ethernet PoE Switch with 1x High Power(60W) & 1x Fiber |
| Model | LNK-HP1460 |
| Connector Type | 4x 10/100M copper cable RJ45 ports(all ports support MDI/MDIX), including 1x 60W high power PoE port & 1x SC Fiber uplink |
| Network Media |
10BASE-T: Cat3,4,5 UTP(≤100 meter); 100BASE-TX: Cat5 or more UTP (≤100 meter) |
| Bandwidth | 800Mbps |
| Address Database Size | 1K |
| MTBF | 60,000 hours |
| Forwarding Mode | Store-And-Forward Architecture |
| Network Latency | Switch Throughput:0.74Mpps@64Bytes |
| Network Protocols |
IEEE 802.3i 10BASET; IEEE 802.3u 100BASETX; IEEE 802.3x Flow Control IEEE 802.1af DTE Power via MDI; IEEE 802.3af |
| LED Display | Power, Ethernet Data, PoE working status |
| Power |
Maximum PoE power in total: 70W 1x high power PoE port with maximum power: 60W Power for each PoE port:15.4 W Power input: AC100-240V 50/60Hz; (every country use a custom power plug) |
| Working Environment |
Working temperature:-20°～ +60°C , Storage temperature: -40°～ 85°C, Working Humidity: 5%～95%, non-condensing |
| Radiation |
CE mark, commercial FCC Part 15 Class B VCCI Class B EN 55022 (CISPR 22), Class B |
| Transmission Distance | MMF: 2KM; 25KM |
| QoS | Yes |
| NMP | NO |
| VLAN | NO |
| Product Size | 118x89x25mm, 0.26kg |
| Package Size | 250x205x87mm,1.1kg |
|
Warranty |
switch warranty: 1 year, adapter warranty: 2 years. lifetime maintenance |
Features
- Single port supported high power PoE, special for high speed dome
- Supply power to wireless access points and surveillance cameras over Cat-5
- 4x 10/100Mbps PoE ports+ 1x optical fiber SC interface
- 1 PoE port supports 60W high power
- Total power budget is up to 70W
- Supports IEEE 802.3x flow control for Full-duplex Mode and backpressure for Half-duplex Mode
- 2K entry MAC address table of the PoE Switch with auto-learning and auto-aging
- LED indicators for monitoring power, link, activity and speed
- External power adapter supply
Application
- HD monitor transmission and power supply
- Wireless AP layout transmission and power supply
- Network telephone transmission , intelligent house and home system
- Intelligent transportation supervisory system(ITS)
- High-speed Way supervisory/Tele-Communication System
- Security protection system, TV medical treatment
- Long-distance Muti-media Schooling, Campus monitoring
- Long-distance broadcast television transmission system
- High-building Security Protection, Military Tele-Com projects
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.