100000h Helipad Landing Lights Touchdown And Lift Off Area Led Heliport Lighting
Heliport Inset light is always be installed at locations where the lights are frequently knocked down by aircraft or maintenance vehicles.
A TLOF lighting system shall be provided at a heliport intended for use at night. TLOF perimeter lights shall be placed along the edge of the area designated for use as the TLOF or within a distance of 1.5 m from the edge.
The TLOF perimeter lights shall be fixed omnidirectional lights showing green.
8inch International standard mounting for aerodrome inset light.
Compliance
l FAA AC 150/5390-2B Heliport Design Guide
l CAAC MH 5001—2013 Aerodrome technical standards
l CAAC MH 5013—2014 Technical Standards of Civil Heliports
Features
Electrical
l Ultra high intensity CREE LED as light source saving power consumption and maintenance, 95% less power than equivalent incandescent light
l Power supply available in AC(110-240VAC), DC48V
Physical
l Pressure resistance lens allowed the vehicles go through on light
l Die-casting aluminum covered by color powder coasted which have good corrosion protection and load bearing.
l IP68 waterproof ensure light work fine underground
Optional
l Infrared LED for pilot using NVG(Night Vision Goggles)
l Controller for power supplying and turn ON/OFF light
l VHF pilot to ground remote control
l Light intensity adjustable
Application
l Surface-level heliport
l Elevated heliport or helideck
| SPECIFICATIONS | AH-HP-I-TLOF(L) LED Heliport Touchdown and Lift-off Area Lighting |
| Light Characteristics | |
| Light Source | CREE Ultra high intensity LED |
| Emitting Color | Green |
| Intensity(cd) | ICAO standard, refer to Photometric table |
| Horizontal Degree(°) | Omnidirection (360°) |
| Vertical Degree(°) | ICAO specification |
| Flash Characteristics | Steady burning |
| Operation Mode | 24hours operation |
| LED Life Experience(hours) | >100,000 |
| Electrical Characteristics | |
| Operating Voltage | 110-240VAC, 48VDC, 24VDC or others |
| Power(W) | ≤5W |
| Physical Characteristics | |
| Body Material | Die-casting aluminum |
| Overall size(mm) | Θ220×133.47 |
| Installation size(mm) | Θ225×145-M10*2 |
| Weight(kg) | 4 |
| Product Life Expectancy |
≥10 years
|
| Environmental Factors | |
|
Ambient Temperature(℃) -55℃~+70℃ |
-55~70 |
| Humidity | 0~100% |
| Waterproof | IP68 |
| Compliance | |
| Options Available | |
| Infrared LED compatible for NVG (Night | |
| Vision Goggles) | |
| Light intensity adjustable | |
|
VHF pilot to ground remote control
|
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.