Self Solderable Copper Litz Wire 0.1 X 35 / Rectangular Magnet Litz Wire For Inductive Heaters
SELF SOLDERABLE COPPER LITZ WIRE 0.1*35 RECTANGULAR MAGNET LITZ WIRE FOR INDUCTIVE HEATERS
High frequency litz wire is used in transformers and chokes to reduce the power losses that occur due to the eddy current and reduce the skin effect. Operating frequency determines the litz wire parameters and defines the diameter of a single wire. The
higher operating frequency of inductive components, the smaller diameter of a single wire.Insulation of copper wires is made of polyurethane. This fact makes it easy to tin terminals of winding. High dielectric strenght can be achieved by one or multiple wrapping polyester tape (Mylar), polimide tape, kapton tape, etc. Despite this, the litz wire has an excellent flexibility. Usually litz wire is supplied in round cross-section. However it can be profiled and made in square or rectangular cross section to optimize the winding area.
SPECIFICATION
|
Characteristics |
Technical requests |
Test Results |
|||
|
Sample 1 |
Sample 2 |
Sample 3 |
|||
|
Surface |
Good |
OK |
OK |
OK |
|
|
Single wire outer diameter |
0.110-0.125 |
0.115 |
0.119 |
0.117 |
|
|
Single wire inner diameter |
0.100±0.003 |
0.1 |
0.1 |
0.1 |
|
|
Structure(Number/ Single wire inner diameter ) |
0.10/35 |
0.10/35 |
0.10/35 |
0.10/35 |
|
|
Direction |
Right |
Right |
Right |
Right |
|
|
Pitch |
14.7+15% |
14.7 |
14.7 |
14.7 |
|
|
Outer diameter |
|
----- |
----- |
----- |
|
|
Pinhole Test |
<12 |
1 |
0 |
0 |
|
|
Breakdown Voltage |
>1100V |
2400V |
2400V |
2500V |
|
|
Conductor Resistance |
|
----- |
----- |
----- |
|
|
Immersion tin test |
410±5℃ 3S |
OK |
OK |
OK |
|
|
Package |
According to requirement |
OK |
OK |
OK |
|
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.