0.4mm Triple Insulated Copper Wire / Tiw Enameled Wire 130 Rated Temperature
0.4MM TRIPLE INSULATED COPPER WIRE TIW ENAMELED WIRE 130 RATED TEMPERATURE
Supply Ability:
100 Ton/Tons per Month Triple Insulated Layers Wire
Packaging Details
Triple Insulated Layers Wire
Inner packing: winding wire with plastic spools (PT2-PT200) according to different diameters
Outer packing: Wooden pallet and wooden case or according to customers' special requirement.
Port
Tianjin or customer specified port
Feature:
The feature of triple inslated wire is in its insulation layers. IEC standards require specified insulation between primary and secondary coils of transformers. And the standards do not accept general enameled wire as insulation therefore insulation tape or barrier tape are required in transformers using enameled wire. Triple insulated wire however, has triple insulation layers which comply IEC requirement and therefore can be used without barrier tape or interlayer tape between primary and secondary coils.
Specification:
| Characteristics | Technical requests | Test Results | Conclusion | ||||||||
| Sample 1 | Sample 2 | ||||||||||
| 1 | Surface | Good | OK | OK | OK | ||||||
| 2 | Bare Wire Diameter | 0.4± | 0.01 | 0.399 | 0.397 | OK | |||||
| 0.01 | |||||||||||
| 4 | Overall Diameter | 0.6±0.02mm | 0.599 | 0.601 | OK | ||||||
| 5 | Conductor Resistance | ≤ 145.3Ω/km | 136.46 | 137.25 | OK | ||||||
| 6 | Elongation | ≥ 20 % | 33.4% | 32.8% | OK | ||||||
| Remark: | |||||||||||
| Test Items | Technical Requests | Results |
Conclusion: Approved |
||||||||
| 1 | Adhesive | Coating layer is good | OK | ||||||||
| 2 | Heat Shock | 225 ℃ 30min no crack | OK | Audit by | Tested by | ||||||
| 3 | Solder Ability | 420± 10℃ 2-10 Secs | OK | Shanying Li | |||||||
| 4 | Breakdown Voltage | AC6KV/60s, no degumming, no crack | OK | ||||||||
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.