0.5 X 2700 PET Covered Profiled Flat Litz Wire High Frequency Litz Wire For Transformer
0.5 X 2700 PETCOVERED PROFILED FLAT HIGH FREQUENCY LITZ WIRE FOR TRANSFORMER HIGH CUT THROUGH
Litz wire is a type of cable used in electronics to carry alternating current. The wire is designed to reduce the skin effect and proximity effect losses in conductors used at frequencies up to about 1 MHz. It consists of many thin wire strands, individually insulated and twisted or woven together, PET covered litz wire is a kind of Mylar wire that against high break down voltage over 5000 volts, which is a little complicated, but make the round wire to flat litz wire is a little more complicated, but for us that's ok.
FEATURES
-
Minimize the power losses due to "skin effect".
-
Superior "Q" characteristics at high frequencies.
-
Excellent resistance to abrasion and solvent,
-
Excellent electricity performance
-
Excellent heat shock, adherence and flexibility
-
High cut through
|
Characteristics |
Technical requests |
||
|
Inner diameter |
0.05±0.003 mm |
||
|
Thickness of coating |
≥ 0.005mm |
||
|
Outer diameter |
≤ 0.06 mm |
||
|
Twist direction |
S/Z |
||
|
Strands |
58*18*3=2700 |
||
|
Cross section of conductor(mm2) |
5.3 |
||
|
Thickness of PET film |
0.025mm |
||
|
Breakdown Voltage |
>5000V |
||
|
Conductor Resistance |
≤ 3.791 Ω/km |
||
|
Profiled Size |
Width ≤4.0mm |
||
|
Thickness≤4.0mm |
|||
|
Overlapping Rate |
>50% |
||
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.