8/6E-G Pump Industrial Centrifugal Pumps for river course / reservoir desalting

8/6E-G Pump Industrial Centrifugal Pumps for river course / reservoir desalting

8/6E-G Pump, G, GH type sand pump is the introduction of technology products, the pump with single pump pump shell structure, single-stage single suction cantilever centrifugal pump, 

The use of centrifugal pump (slurry pump), pump test run should meet the following requirements:

1. The steering of the driver should be the same as the pump;
2. Find out the steering of pipe pump and coaxial pump;
3. 3. The parts of each fixed connection shall be free of looseness, and the specifications and quantities of lubricant added to each lubricating part shall be in conformity with the provisions of the technical documents of the equipment;
4. The pre lubrication shall be carried out according to the provisions of the pre lubrication requirements;
5. Every indicating instrument and safety protection device should be sensitive, accurate and reliable;
6. The turning gear should be flexible, no abnormal phenomenon;
7. The heat pump operation should be carried out before the pump body in the preheating temperature should be uniform, rise, should not be greater than 500 degrees per hour temperature rise; temperature difference between the surface of the pump body and a working medium inlet pipe should not be greater than 4090;
8. The connecting device is set to eliminate the impact of temperature rise, set up to provide cooling water bypass connections.

PERFORMANCE