NS-ISO 13920BF Marine Winch Parts Pilot Rope Hole For Winding Wire Rope
Marine Winch Fittings Pilot Rope Hole For Winding Wire Rope Or Cable
Product name:Marine Winch Fittings Pilot Rope Hole For Winding Wire Rope Or Cable
Other name:Pilot Rope Hole
Standard:NS-ISO 13920BF
Sling type:cable or wire
power: Electirc
Material:Steel + rubber
Rope: 100-1000mm
Rope diameter: 3-199mm
Tolerance General: NS-ISO 13920BF
Preparation and cutting of steel
Cutting and beveling of materials shall be carried out by thermal cutting or machining.
Thermally cut edges shall be ground to sound metal before welding.
All sharp edges, corners and Curing Zone must be rounded to R=2.5mm.
Stainless steel shall by ground, and then acid treated and cleaned before use.
Structural composition
| Q/TY | ITEM | DESCRIPTION | TECHNICAL DESCRIPTION | MATERIAL | MASS | |
| 1 | 1 | Plate | PL15 | S355J2+N | 127.41KG | |
| 2 | 2 | Plate | PL15 | S355J2+N | 48.32KG | |
| 1 | 3 | Plate | PL15 | S355J2+N | 48.32KG | |
| 2 | 4 | Plate | PL15 | S355J2+N | 17.29KG | |
| 4 | 5 | Plate | PL25 | S355J2+N | 11.94KG | |
| 1 | 6 | Plate | PL35 | S355J2+N | 5.25KG |
The towing force of a ship is much greater than that of its mooring line, so the lead line hole in the emergency towing belt generally bears a huge load directly.
In order to avoid the deformation or even fracture of the pilot cable hole during the use of the pilot cable hole, the ship can not work normally or even cause serious safety accidents. Therefore, our company carried out stress, strain and fatigue analysis for the cable guide hole to make improvement analysis.
Finishing requirement
To ensure sufficient adhession for surface treatment all sarp edges shall be rounded to minimum R2.5, welding spatter beadsd and slag shall be completely removed ,Damage in surfaces shall be filed and grinded flush, negative thickness measurements are prohibited
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.