Title:Stainless Steel 304 LBS Grooved Drum for Winch and Windlass

Product introduction:

The LBS grooved drum contains wire-fixing device,main drum, flanges and web. Its main parameters is following:

1.groove type:LBS groove--make the rope ordered arrangement and suit for multi-layer spooling

2.wire rope diameter: 11mm---the diameter will decide groove pitch.

3.drum diameter and length: φ400 length:300mm

4.material:stainless steel 304

5. rotation direction:left or right

6.surface finish: paint

Rapid customization:Pls let us know the parameters----rope diameter , drum diameter,drum length, groove and material.LBS groove is cut directly into the body of the drum, according to customers’ requirements, the flanges are either welded or screw-bolted. groove geometry is determined by rope construction, diameter and length, and by application. the drum has the required mounting dimensions for the actual operating conditions.

Regular product parameters:

Product structure:

It is composed of two parallel grooves and two crossed grooves in every circle of the winch drum.

The advantages of multilayer winding:

When the wire rope need to wind many layers, the LBS groove can fix the crossover point of the upper rope and the lower rope through crossed groove, which could control the crossover point and make it finished in the crossed groove. In the parallel groove,the upper wire rope can falls into the groove formed by two lower rope. It can form a stable structure between the upper wire rope and the lower wire rope.

Packing and delivery:

BY SEA: delivery from tianjin port or qingdao port

By Air: Beijing port

BY express:DHL /TNT