OEM / ODM Three Phase Prepaid Energy Meter IC Card Prepayment Meter With Pulse Output
Three Phase Three Wire Prepaid Energy Meters IC Card Prepayment Meter with Pulse Output
- Electric Meter Plastic Seal prepaid energy meter three phase four wire with card
- Reverse usage measuring
- Prepaying the energy
- Alarm notification when left prepayment is not enough
- overload control
- error self-inspection
Technical parameters:
| Electrical parameters: | |
| Voltage | |
| Nominal voltage Un | 3x220V |
| Extended operating voltage range | 80%~115%Un |
| Limited voltage | 70%~120%Un |
| Frequency | |
| Nominal frequency fn | 60Hz |
| tolerance | 5% |
| Current | |
| Basic current(Ib) | 10A |
| Maximum current(Imax) | 100A |
| Starting current(Ist) | 30mA |
| Active energy constant | 400imp/kWh |
| Measurement Accuracy | |
| Active energy to IEC6205321 | Class1.0 |
| Reactive energy to IEC6205323 | Class2.0 |
| Power Consumption | |
| Power consumption in Voltage circuit | <2W <8VA |
| Power consumption in current circuit | <1VA |
| Temperature range | |
| Operation meter | 25ºC to+70ºC |
| Storage | 40ºC to+85ºC |
| Insulation strength | |
| AC Insulation strength | 4kV at 50Hz during 1min |
| Impulse voltage 1.2/50μs mains connections | 8kV |
| Electro Magnetic Compatibility | |
| Electrostatic discharges | |
| Contact discharge | 8kV |
| Air discharge | 16kV |
| Electromagnetic RF fields | |
| 27MHz to 500MHz typical | 10V/m |
| 100kHz to 1GHz typical | 30V/m |
| Fast transient burst test | 4kV |
| Mechanical requirements | |
| Meter shell Protection Rate | IP54 |
| Protection | classII |
Main Features:
- Pay As You Go: IC card that adopts " Financial Card Project" hardware encryption technology is used by the Power Company to collect the electricity fee in advance.
- High Reliability: the meter is combined with fully-digital metering, kWh display, prepayment control, card reading and smart anti-theft technique .
- Overload Protection: the meter will cut off the power supply circuit automatically when the load exceeding about 20%~30% of rated Max. Current lasts for 10~15s;
- High Security And Accuracy: the IC card is used multiple encryption via hardware and software to ensure data safety, accurate and reliable. The special design of IC Card is that it can record the the information about remaining electricity fee, accumulated electricity when the User insert it into the meter and also can reflect power stealing action.
- Perfect Interface Protection: the meter has the capability to protect circuit against malicious attacks.
- Scrolling Display: the show time of different metering parameters is 10s for residual electricity fee (Two decimals, CNY), 5s for unit price, 5s for accumulated power consumption (One decimal, kWh) and 5s for the current power consumption (One decimal, kWh)
- Easy-To-Read: The total and unit price of electricity inside the meter is accumulated in the unit of four decimals and CNY.
- Has the feature of partition management.
- Supports for max. hoarding electricity quantity and alarm mode.
- Magnetic Latching Relay Applied: it can improve the performance of outage movement and lower the power consumption after power failure, and meanwhile, also can get rid of the contactor adhesions when the relay is being worked under the large current for a long time.
- The meter will keep data or get recovery when being powered on./off automatically.
Features
1. Product's Type-- One Card One Meter, Multi Cards One Meter, One Card Multi Meters, Special Load Identification.
2. Electric Power Measurement-- Positive active power and reverse active power which can be measured.
3. Prepayment-- IC Card prepaid, electricity sector receive energy charge in advance through selling IC Card. User pay first.
4. Ladder Billing-- Two schemes for electricity price. It can automatic changeover when at promissory time or reach certain value.
5. Manner of Working-- Warning/Overdraw Manner. Warming/Overdraw electricity, maximum accumulations can be set.
6. Protections-- Over Voltage, Over Current, Over Load Protections.
7. Display Method-- LED or LCD display the rest electricity(charge), cumulative electricity consumption, current power in alternant way.
8. Reliable Design-- Perfect power source and electromagnetism compatible design, which are suitable to the strong electromagnetism disturbance and big occasion of power source fluctuation.
9. Cover for Meter-- Fully sealed dustproof and waterproof design, material of cover has excellent flame retardant and anti-corrosion, anti-aging properties.
10. Interface Protection-- Perfect interface protection circuit, which keeps the meter from all kinds of vicious attack, no damaging for meter, no lose for data, and no delay for active.
11. Communication Mode-- Infrared, RS485 interface or carrier communication module (Optional).
12. Power Supply System-- Three-phase power supply or it can work while just one phase has electricity if three phase four wires.
13. Management System-- Suit for Digital IC Card Smart Electric Meter Management System(SKZHSFN3.17-SD), Water/Electricity "One Card" Management System (SKZHSFN3.17-YKT).
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
