10 Inch Printing PVC Wood Panels Groove Golden Line Pattern For Ceilings

PVC Wood Panels Introduction:

PVC panel has various advantages over other materials, namely they are waterproof, termite proof, fire retardant, economical, maintenance free, being non-porous and non-absorbent, can incorporate flush fitted lighting, access hatches, air vents and sprinklers. PVC panels are also easy to instal and available in various colours, shades and patterns, they are hassle-free to paint over or polish.

Normal sizes:

Surface Treatment:

PVC Wood Panels Advantages:

(1) Water Resistant: PVC panels are very popular in the bathroom and kitchen areas as they are water-repellent and mould resistant. It can also be used all over the house.

(2) Budget-friendly: It is far more economical as compared to wood, paint, tiles and wall papers.

(3) Hygienic: PVC panels provide a very clean and hygienic for wall and ceiling decoration. Once installed, there is no grout to go dirty. PVC is mould-repellent and not a suitable material for bacterial growth.

(4) Low maintenance: PVC panels require only a low maintenance , and when you want to clean them , it does not take you long. Due to the smooth surface of the panels, dirt does not gather in pores or cracks. A simple cloth will do to clean the surface. Do not use chlorinates or abrasive agents.

(5) Recyclable: PVC panels are 100% recyclable. They can be taken to any plastic recycling center. NO further finishing or care required after installation - no paint , no lack, no varnish. 

PVC Wood Panels Installation:

1. Clean the surface of ceiling.

2. Nail wooden or steel battens(20mm - 30mm thick) into the wall and ceiling, with all the corners firstly, then on the plane with the distance of 400mm away between every wooden batten.

3. Screw PVC profiles(cornices) on all the corners, then insert the panel into the corner profiles, then the folling panel into the first panel.

4. Screw PVC second panel's notch side into the wooden or steel battens, then insert the third panel, then the fourth, and nail the fourth's notch side, then fifth and sixth, then...

5. Attention for the distance and notch side panel: for the ways above is based on 250mm or 300mm wide panels, and wooden or steel battens between distance is 400mm, so every 2 panel, screw the second notch. Surely you could change the ways as per your situation presently, by way of changing the distance of the panels and the wooden or stell battens.

Loading Quantity Of Different Specification PVC Panel For One Container:

PVC Wood Panels Application: