Programmable Explosion proof test chamber for battery test
Product Description
Programmable Explosion proof Test Chamber is also known as hot and cold impact testing machine, used to test or composite material structure, in an instant by the extremely high temperature and low temperature under continuous environment can endure degree, in order to test in the shortest possible time chemical changes caused by heat bilges cold shrink or physical damage. Applicable to metal and plastic,rubber,electronic...Such as material, can be used as the basis of its product improvements.
Battery anti-explosion test chamber price, battery explosion proof testing machine is mainly used for battery overcharge and discharge, charge and discharge test, the battery placed in the explosion-proof box, external charge and discharge tester, for the operation of personnel and equipment protection, the machine test box according to test requirements customized.
Corresponding standard
GB 31241-2014, GB/T 18287 -2013,GB/T 8897.6-2008,YD/T 2366.1-2011,GB/T 21966-2008,
MT/T 1051-2007
IEC 62660, IEC 60082, IEC 61960, IEEE 1625
Battery explosion-proof optionals:
![]()
![]()
![]()
![]()
Technical Specification
| Model |
SMC-80-CC-FB |
SMC-150-CC-FB |
SMC-225-CC-FB |
SMC-408-CC-FB |
SMC-800-CC-FB |
SMC-1000-CC-FB |
SMC-1500-CC-FB |
| Temperature |
Temperature control range |
-70℃～180℃ (A:0℃～180℃;B:-20℃～180℃；C:-40℃～180℃;D:-70℃～180℃) |
| Temperature fluctuation |
±0.5℃ |
| Cooling rate |
180.0℃～-70.0℃ Within 100 mins 1.0～3.0℃/min |
| Heating rate |
-70.0℃～180.0℃ Within 60 mins 3.0～5.0℃/min |
| Temperature uniformity |
±1.5℃ (-40.0℃～100.0℃) ; ±2.0℃ (100.1℃～180.0℃or-40.0℃～-70.0℃) |
| Humidity |
Humidity control range |
10.0%RH～98.0%RH (60℃ above corresponds to 10%RH) |
| Humidity fluctuation |
±1.0% RH |
| Humidity uniformity |
±2.0％RH |
| Material / |
Internal material |
Adopts 1.2mm thickness stainess steel(SUS304) |
| components |
External material |
Adopts 1.2mm thickness Cold rolled steel sheet / powder spraying |
| |
Heat insulating material |
100mm thickness polyurethane plate＋10mm thickness mineral wool |
| |
Fan |
Centrifugal blower |
| |
Compressor |
Semi-closed Germany Bock, Germany Bitzer |
| |
Condenser |
Air cooling, water cooling |
| |
Refrigerant |
R404A,R23,R508, R449A |
| |
Evaporator |
Fin - and - Tube Heat Exchanger |
| |
Heater |
Nickel chromium alloy heating wire |
| |
Humidifier |
Steam humidifier |
| Options |
Standard configuration |
2 ∅100MM pressure relief port, 4 explosion-prood chains |
| Multipoint temperature |
Adopts Sanwood developed controller, which can be used to acquire surface temperature points of multiple products |
| monitor |
| C02 fire extinguisher |
Automatic fire extinguishing and automatic shutdown of the machine to protect the equipment from burning |
| C0, H2 gas detector |
When the battery will produce gas, it will detect gas solubility and discharge to outdoor when it exceeds the standard |
| Exhaust valve |
When the test sample produces harmful gas, ventilate and exhaust internally |
| Size |
Interior size(cm)W*H*D |
50*50*40 |
50*60*50 |
50*75*60 |
80*85*60 |
100*100*80 |
100*100*100 |
120*100*125 |
| Volume(m³) |
80L |
150L |
225L |
408L |
800L |
1000L |
1500L |
| Operating ambient temperature |
+5 ~ 35℃ |
| Power supply |
220V AC 50/60Hz 22A |
220V AC 50/60Hz 31A |
220V AC 50/60Hz 33A |
380V AC 50/60Hz 17A |
380V AC 50/60Hz 25A |
380V AC 50/60Hz 27A |
380V AC 50/60Hz 50A |
| Controller |
Standard: South Korea TEMI-1500 Optional: South Korea TEMI-2500,South Korea TEMI-2700 |
|
Controller SH-5600,The control panel is provided with USB or RS232 port, a battery surface temperature detection display light( will be divided into three level alarm), a battery fault alarm reminder, a harmful gas alarm, an exhaust indication light, an emergency stop switch, outfire indication light and over temperature protection
Product Catalog:
