Walk In Battery Explosion-proof Temperature Climatic Chamber for EV Battery Pack Environmental Test and Thermal Cyclic
Walk In Battery Explosion-proof Temperature Climatic Chamber for EV Battery Pack Environmental Test
Walk In Battery Explosion-proof Temperature Climatic Chamber Structure and Characteristics:
1.Walk-in Type Explosion-proof High and Low Temperature Test Chamber is composed of the chamber, refrigeration systems, heating systems, air circulation system and control system.
2.The Walk-in Battery Explosion-proof High and Low Temperature Test Chamber is made of high quality SUS#304 stainless steel material,the outer shell adopts A3 steel plate,surface electrostatic spraying.
3.Insulation system uses superfine fiberglass wool or polyurethane foam so as to ensure the temperature of inside chamber.
4.Temperature and humidity control adopts Korean import TEMI360 programmable touch screen temperature and humidity controller, with automatic calculation of PID function.
5.Adopts steam humidifying method, automatic water circulation loop,with functions of automatic filling water.
6.Refrigeration system adopts original France or Germany refrigeration unit and full sets of refrigeration parts.
7.Input mode PT100 sensor.
8.The system of heating up, heating down, dehumidifying, and humidifying can be operated independently so as to reduce the cost of testing, extend the operating life of the machine and decrease the failure rate.
9.Powerful multi-wing type air circulation which can ensure even temperature distribution inside the working chamber.
10.With larger transparent viewing window and lighting inside to observe the test.
11.Door seal adopts silicone rubber material which can avoid aging and hardening in high and low temperature conditions.
12.Standard configuration with one test hole on the left side of the chamber for easy testing operation and temperature measurement.
13.With various of safety protection device such as leakage and outage protection,compressor overpressure protection,overload fusing protection,audio signal alarm.
Walk-in Type Battery Explosion-proof High and Low Temperature Test Chamber Specification:
| Model | SMC-080-CC-WT | SMC-120-CC-WT | SMC-160-CC-WT | SMC-250-CC-WT | SMC-340-CC-WT | SMC-400-CC-WT | |
| Temperature | Temperature range | -65℃～80℃(+15℃) (A:0℃～80℃;B:-20℃～80℃；C:-40℃～80℃;D:-65℃～80℃) | |||||
| Temperature fluctuation | ±0.5℃ | ||||||
| Cooling rate | 80.0℃～-65.0℃ Within 110mins (Liner or nonlinear:1.0℃,3.0℃,5.0℃,10.0℃,15.0℃/min) | ||||||
| Heating rate | -65.0℃～80.0℃ Within 70mins (Liner or nonlinear:1.0℃,3.0℃,5.0℃,10.0℃,15.0℃/min) | ||||||
| Temperature uniformity | ±2.0℃ (-40.0℃～80.0℃) | ||||||
| ±2.5℃ (-40.0℃～-65.0℃) | |||||||
| Material | Internal material | Stainess steel(SUS304) | |||||
| External material | Cold rolled steel sheet / powder spraying | ||||||
| Heat insulating material | 100mm thickness polyurethane plate＋10mm thickness mineral wool | ||||||
| Fan | Centrifugal blower | ||||||
| Compressor | Semi-closed Germany Bock, Germany Bitzer | ||||||
| Condenser | Water-cooled | ||||||
| Refrigerant | R404A,R23,R508 | ||||||
| Evaporator | Fin - and - Tube Heat Exchanger | ||||||
| Heater | Nickel chromium alloy heating wire | ||||||
| Humidifier | Steam humidifier | ||||||
| Options | Standard configuration | 2 ∅100MM pressure relief port, 4 explosion-prood chains | |||||
| Multipoint temperature monitor |
Adopts Sanwood developed controller, which can be used to acquire surface temperature points of multiple products | ||||||
| C02 fire extinguisher | Automatic fire extinguishing and automatic shutdown of the machine to protect the equipment from burning | ||||||
| C0, H2 gas detector | When the battery will produce gas, it will detect gas solubility and discharge to outdoor when it exceeds the standard | ||||||
| Exhaust valve | When the test sample produces harmful gas, ventilate and exhaust internally | ||||||
| Size | Interior size(mm) W*H*D |
1970*2100*1970 | 3020*2100*1970 | 4070*2100*1970 | 3020*2100*4070 | 4070*2100*4070 | 5120*2100*4070 |
| Outer size(mm) W*H*D |
2170*2350*3500 | 3220*2350*3500 | 4270*2350*3500 | 4650*2350*4270 | 5720*2350*4270 | 5320(*2350*6150 | |
| Volume(m³) | 8.0m³ | 12.0m³ | 16.0m³ | 25.0m³ | 34.0m³ | 40.0m³ | |
| Power supply | 380V AC 50/60Hz | 380V AC 50/60Hz | 380V AC 50/60Hz | 380V AC 50/60Hz | 380V AC 50/60Hz | 380V AC 50/60Hz | |
| Controller | Standard: South Korea TEMI-1500 Optional: South Korea TEMI-2500,South Korea TEMI-2700 | ||||||
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.