Automatic Seawater Immersion Climatic Test Chamber

Sea Water Immersion Test Machine

The sea water immersion test machine is mainly used for seawater immersion test with temperature shock for power battery, and the quality and reliability test of products, parts and materials under simulated seawater immersion conditions. 

The machine is composed of high temperature test area, sea water tank and lifting basket three parts. 

Relevant standards requirement: 
1.Test Object: Battery storage pack or system. 
2.The test object connects all the wiring harness, connector and other parts according to the whole vehicle connection mode. Select one of the following two methods to operate test at the room temperature.
•Immerse the test objects (in the direction of real vehicle assembling) into 3.5% NaCl solution (mass fraction, simulated under normal temperature water composition) for 2 hours. The water depth is to be sufficient to completely submerge the test objects.
•Test objects according to GB/T4208-2017 part 14.2.7 test method and test process.  

Technical Parameters:

Safety protection: 

1) Sea water tank refrigeration system:

    compressor overload protection; Over pressure protection; low pressure protection; Over temperature protection; shortage of oil protection; water shortage protection; water over temperature protection; 

2) High temperature unit heating system: Heater short circuit protection; heater over temperature protection; 

3) Power supply: leakage protection, short circuit protection, wrong phase, low pressure protection, over pressure protection; 

4) Three color light to show the working status 

5) water pump: overload protection, short circuit protection;