30w Waterproof Electronic Led Driver , Overload Protection Waterproof Led Driver
12v 30w Transformer Power Supply Driver Led Light Waterproof Ip67
30W DC Waterproof LED Transformer Power Supply Driver
IP67 design for indoor or outdoor installations
Protections: Short circuit / Overload/Over temperature
Cooling by free air convection
100% full load burn-in test
Suitable for LED lighting
Products through CE, RoHS Certification
| SPECIFICATION | |||
|
MODEL |
12V 30W | 24V 30W | |
|
OUTPUT |
DC VOLTAGE | 12V | 24V |
| RATED CURRENT | 2.5A | 1.25A | |
| CURRENT RANGE | 0~2.5A | 0~1.25A | |
| RATED POWER | 30W | 30W | |
|
NOTE.2 RIPPLE & NOISE (max.) |
150mV | 150mV | |
|
NOTE.3 VOLTAGE TOLERANCE |
±4% | ±2% | |
| SETUP, RISE TIME | 80ms/220VAC | ||
| HOLD UP TIME (Typ.) | 60ms/220VAC | ||
|
INPUT |
VOLTAGE RANGE | 170 ~ 250VAC | |
| FREQUENCY RANGE | 50 ~ 60Hz | ||
| POWER FACTOR (Typ.) | PF>0.6/220VAC | ||
| EFFICIENCY (Typ.) | 80% | 81% | |
| AC CURRENT (Typ.) | 0.28A/220VAC | ||
| INRUSH CURRENT (Typ.) | COLD START 40A/220VAC | ||
|
PROTECTION |
Short circuit | Protection type : recovers automatically after fault condition is removed | |
| Overload | overload protected @ 145-160% above peak rating | ||
| Over temperature | Protection type : Shut down o/p voltage, re-power on to recover | ||
|
ENVIRONMENT |
WORKING TEMP. | -30 ~ +50℃ (Refer to output load derating curve) | |
| WORKING HUMIDITY | 20 ~ 99% RH non-condensing(Waterproof) | ||
| STORAGE TEMP., HUMID IT Y | -40 ~ +80℃ , 10 ~ 99% RH | ||
|
SAFETY & EMC |
SAFETY STANDARDS | CE Mark (LVD) , IP67 | |
| WITHSTAND VOLTAGE | I/P-O/P:1.5KVAC I/P-GND:1.5KVAC | ||
|
EMC Test Standards |
EN55015:2006 ; EN61547:1995+A1:2000 ; EN61000-3-2:2006 ; EN61000-3-3:1995+A2:2005 ; EN61347-1:2001 ; EN61347-2-13:2006 |
||
|
NOTE |
1. All parameters NOT specially mentioned are measured at 220VAC input, rated load and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 1 0 uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation. |
||
|
DIMENSION |
192×29×20.5(mm) (L×W×H) |
|
CARTO N QUANTI TY |
50PCS/Carton |
|
CARTON SIZE |
390×215×200(mm) |
|
WEIGHT |
215g/PCS |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.