Automatic Electric Meat Mixer , Stainless Steel Food Mixer For Meat Stuffers Sausage

50lbs Stainless Steel Meat Mixer Attachment to Any Electric Meat Grinder with See through Cover

Specifications:

50lbs Stainless Steel Meat Mixer Attachment to Any Electric Meat Grinder with See through Cover

Description:

• Available in two sizes: 25 lb. and 50 lb.
• Your any requirement of mixing meat can be done
in this easy-to-use mixer
• Stainless steel construction
• Gear-reducing transmission keeps grinder's
revolutions reduced to appropriate level
• Specially designed to attach any stainless steel
E-grinder
• Large handle for easy cranking
• With a See-through cover
• Adjustable feet let you set the height
• 25 lb. tub size measures 11" L x 10 1/4" W x 13" H
• 50 lb. tub size measures 14" L x 11" W x 14" H
• Item# MM-303025 25 lb. Mixer
• Item# MM-303050 50 lb. Mixer

Assembly Instructions:

• Attach the 4 mixer feet (#16) to the unit (#1) by threading the mixer feet bolts into the unit and attaching the mixer feet nuts onto each of the mixer feet bolts.
• Place the drive gear shaft (#10) of the meat mixer close to the drive shaft of the grinder motor. Adjust the mixer feet (#16) up or down until the drive gear shaft (#10) of the mixer aligns perfectly with the drive shaft of the grinder motor.
• Tighten the nuts on the mixer foot bolts to hold the unit at the desired height.
• Slide the units together as tightly as possible. Turn the paddles of the mixer until the drive gear shaft aligns with the grinder motor drive shaft.
• CAUTION: Before attaching the mixer to the grinder motor, be certain the mixer feet are properly adjusted so the drive gear of the mixer is level with the drive of the grinder motor. Failure to do so may cause unnecessary wear or damage to the bushings and gears of both units.
• Tighten the grinder head star bolt on the grinder motor (not shown) against the mixer attachment. Plug in the grinder motor.