ASTM D1230 45 Degree Flammability Tester With Glass Observation Panel
ASTM D1230 Flammaility Testing Equipment 45 Degree Automatic Flammability Tester
Indroduction
45 Degree is used to evaluate compliance of fire-retardant products with fire-retardant performance standards according to the combustion method, and measures combustion characteristics such as After Glow and After Flame of test specimen installed at a 45-degree angle.
45˚ Flammability tests After Flame Time and After Glow Time of specimen by heat in the chamber.
This measures flame retardance about specimen of less than 5 mm thick (Board, Plate, Sheet, Film and so on) by 45˚ Micro and Airmix method and evaluates materials about 3rd grade of flame retardance (less than 15cm and 5 seconds)
To determine the burning characteristics of textiles under controlled conditions. Stainless steel test cabinet with glass observation panel provided with automatic timing of flame spread in 0.1-second increments from ignition. Brushing Device including Spare Nylon Brush.
Key Specification
| Time Display | 0-99.9S |
| Resolving Capability | 0.1S |
| Ignition time | 1s or set it Set arbitrary |
| Dimensions | 400 x 300 x 500mm (L*W*H) |
| Power | AC 220V / 50Hz / 2A |
| Standards | ASTM D1230, CRF 16-1610 |
| Weight | 45kg |
Standards:
| • KS F 2819 : Testing Method For Incombustibility Of Thin Materials (Testing Method for incombustibility of thin materials for construction) • ASTM D 1230 Canadian Minimum Flammability Standards for most fabrics • NFPA 702 Forced edge ignition of fabrics cited by California for Hospital Apparel and Bedding Fabrics • CA TB 117 (2000) Upholstery Fabrics (Section E) Synthetic Filling (Section C) • BIFMA Upholstery material screening test |
Brush device
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.