Footwear Testing Equipment Safety Shoe Impact Tester With Impact Energy Of 10~200J Optional
Product information
This machine, incorporating a steel striker adaptered to fall freely on vertical guides from a predetermined height to give the required impact energy to the toe of safety footwear for measuring the degree of the dent. In addition, the toecap should not develop any cracks on the test axis with go through the material.
Purpose
Evaluate the smash resistance of the toe cap of a safety or protective shoe.
Test principle
The impact hammer of the toe impact tester falls from the set height, impacts the toe of the safety shoe or the protective shoe with a certain energy once, and is placed in the toe of the safety shoe or the protective shoe by the measurement after the impact. The minimum height of the sculpture clay cylinder, as well as the size of the toe cap and whether the protective toe cap in the toe cap breaks and transmits light to evaluate the safety performance of the safety shoe or the protective shoe toe.
Technical parameter
| Falling weight | 20 ± 0.2 kg ; 22.7 ± 0.23 kg； 5±0.1kg(Optional) |
| Impact energy | 10~200J Optional |
| Stroke | 0~1100mm Adjustable |
| Dimension(W×D×H) | Main unit:83 cm ×60 cm ×235 cm |
| Control cabinet | 27 cm ×27 cm ×115 cm |
| Lifting method | Motor drive |
| Weight (approx.) | 240 kg |
| Power | 1∮ AC 220V 50Hz(or specified by user) |
Applicable standards
BS-953, EN20344-2012, ASTM F2413-05, CSA-Z195, and other standards.
Suitable for all types of safety shoes and protective shoes.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.