Embossed 304 Grade Stainless Steel Surface Finish Sheets Wear Resistance
Embossed 304 Grade Stainless Steel Surface Finish Sheets Wear Resistance
Application
It is widely used in construction, ships building industry, car making industry petroleum & chemicalindustries, eletricity industries, food processing and medical industry etc.
Details
|
Commodity |
300 Series 304 Stainless Steel Kick Sheet With Laser Cutting |
|
Grade |
301,302,304,304L,316,316L,310S,309S,321,301,310 |
|
Brand |
TISCO ,BAOSTEEL,POSCO,JISCO,LISCO |
|
Certification |
SGS,BV,IQI,TUV,ISO,etc |
|
Thickness |
0.3-3.0mm |
|
Width |
1000,1219,1250,1500mm, or as your requirements |
|
Length |
2000,2438,2500,3000,6000mm, or as your requirements |
|
Surface |
Hairline |
|
Standard |
ASTM,AISI,SUS,JIS,EN,DIN,GB, ASME,etc |
|
Delivery |
5-7 days after confirming the order |
|
MOQ |
1 Ton according to products |
Chemical Properties:
C:≤0.08 ,Si :≤1.0 ,Mn :≤2.0 ,Cr :18.0～20.0 ,Ni :8.0～10.0,S :≤0.03 ,P :≤0.045
Pysical properties:
|
Tensile strength σb (MPa |
≥ 520
|
Specific heat capacity(0 ~ 100 ℃, KJ kgK) |
0.50
|
|
Conditions yield strength |
σ0.2 (MPa) ≥ 205
|
Thermal conductivity (W m. K) |
(100 ℃), 16.3 21.5 (500 ℃)
|
|
Elongation δ5 (%) |
≥40
|
The linear expansion coefficient k. |
(0 ~ 100 ℃), 17.2 (0 ~ 500 ℃) of 18.4
|
|
Section shrinkage ψ (%) |
≥ 60
|
Resistivity (20 ℃, 10 Ω m.) |
0.73
|
|
Hardness |
≤ 187HB; ≤ 90HRB; ≤ 200HV
|
The longitudinal elastic modulus (20 ℃, KN/mm) |
193 |
|
Melting point (℃) |
1398 ~ 1454
|
Specific heat capacity |
0.50 |
Resistance
Stainless steel’s resistance to corrosion and staining, low maintenance and familiar lustre make it an ideal material for many applications.The alloy is used in cookware, cutlery, household hardware, surgical instruments, major appliances, industrial equipment and as an automotive and construction material in large buildings etc. It also can be use in commercial kitchens and food processing plants, as it can be steam-cleaned and sterilized and does not need paint or other surface finishes.
Processing
Mostly Stainless steel sheet cut from stainless steel coil ,but according to the thickness.If thickness is very thick ,it will be sheets directly.Below are some steps of sheets process.
1.GRINDING
Grinding finish, also called brushed, directional or satin finish. coil or sheet...
2.POLISHING
polished stainless steel sheet uses grinding fluid to polish by polishing equipment on stainless steel ..
3.PVD COLOR COATING
PVD means Physical Vapor Deposition,working in vacuum condiction.....
4.ETCHING
Etching is corrode different kinds of patterns on stainless steel surfaces by chemical methods.
5.EMBOSSING
It is physical rolling on the stainless steel surface, pattern comes from metal roller....
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.