25-95mm Carbon Steel Tube Mill Machine 100m/min Fast Speed
| Attribute | Value |
|---|---|
| Production Name | Carbon Steel Pipe making machine Tube Mill Machine |
| Application | Natural gas, Drain Pipe, 3 NB Tube Production |
| Voltage | 380V/220V |
| Pipe diameter | 25-95mm |
| Thickness | 1-3.5mm |
| Speed | 20-100m/min |
| Key words | Tube Mill Machine |
Uncoiler → Shear & welding machine → Accumulator (Cage) → Forming machine → HF welding → Sizing machine → Flying saw (Cold saw) → Run out table → hydro testing → end facing for API standard. We can equip online testing equipment, like Hydro testing equipment, End facing equipment, UT testing, ECT testing etc.
HG76 High-Frequency Welded Pipe Mill Line is designed to produce welded pipes of Ф25～95mm in diameter and 1～3.5mm in wall thickness as well as square and rectangular pipes and deformed pipes of the corresponding size. Adopting roll pass design, the production line can manufacture welded steel pipes with good quality machining and high precision assembling.
| Conforming to the standard | YB189-64 |
| Material | Low carbon steel and low alloy constructional steel |
| Mechanical properties | σb≤380Mpa, σs≤275MPa |
| Strip width | 50～240mm |
| Strip thickness | 0.4～2.75mm |
| I.D of Coils | Φ508mm |
| O.D of Coils | φ1800mm |
| Coil Weight | ≤3.0T |
| Round Pipe Diameter | 55×55－160×160mm |
| Pipe thickness | 0.4-2.75mm |
| Finish pipe length | 4-6m |
| Cut length accuracy | ±2mm |
| Forming speed | 60-120m/min |
| Power Volume of the Line | Approx. 600KW |
| Power Source | 380V/60Hz/3phases |
| Circulation Cooling Water Flow | 20T/h～30 T/h |
| Pool Volume | 30m³ |
| Compressed Air Flow | 5m³/min |
| Pressure | 5～11kg/cm² |
6m wide, 70m long, at least 5m high from Ceiling Rails to Ground.
- We will send the engineer for the installation and training your workers how to operate this machine correctly.
- Warranty Team: One year quality guarantee, life guarantee repair. Within quality guarantee period, except for failures caused by human error, repair parts will be provided for free. After the quality guarantee period, only charge the cost of the spare parts.
- We supply the pre-sell and after-sell service including workshop design, production output design, installation and training, and skilled engineer support.
- We can also send the engineer working for you several months or 1 year to help improve output, reduce waste and decrease cost.
- We supply pre-sell service - Design for whole project for stainless steel pipe making/carbon steel pipe making.
- We will be responsible for the loading and shipping.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.