Horizontal Rubber Lined Slurry Pumps , Sugar Beets Heavy Duty Slurry Pump
Sugar Beets Horizontal Rubber Pump , Heavy Duty Rubber Slurry Pump
Introduction:
4/3C-R is Rubber-Lined Series features a split-casing design with molded, replaceable rubber liners.
The molded liner may be specified in a variety of natural and synthetic rubbers. Natural gum rubber is standard. The liners offer a shore-A hardness of 30-40 with a tensile strength minimum of 2,700 psi (18 n/mm2). Double-wall construction with an outer grey-iron casing and inner molded-rubber liners. Rubber lined pumps are mainly used for cossosive slurries with pH value 2-5, and they are also used to pump silicon sand, and are used in glass factories.
The heavy duty rubber lined slurry pumps produced by SME are qualified, reliable to the customers from all over the world. We have very successful cases with our customers using the rubber pumps SHR-100E and SHR-150E for quarries, and rubber pump SHR-40B, SHR-75C for
Specifications:
| Model | SHR-75C |
| Outlet | 3-inch |
| Capacity | 79.2-180m3/h |
| TDH | 5-34.5m |
| Rated Motor Power | 30Kw |
| Speed | 800-1800r/min |
| NPSH | 3-5m |
Construction of SHR Rubber Pumps:
Typical Applications:
Tailings
Heavy Mining
Ash Handling
Cyclone Feeds
Pulp and Paper
Corrosive Slurries
Coal Preparation
Mineral Processing
Aggregate Processing
Heavy Refusal Removal
Standard Material of Wet-end Parts: Natural Rubber
| Natural Rubber | Standard |
| Hardness(Shore A) | 52±3 |
| 300% Stretching Strength(MPa) | ≥4 |
| Tensile Strength(MPa) | ≥21 |
| Elongation at Break(%) | ≥500 |
| Tensile Set at Break(%) | ≤25 |
| Rubber to Metal Bonding Pull Strength(MPa) | ≥5 |
| Akron Abrasion cm3/1.61km | ≤0.08 |
| Acid & Alkali Resistant PH Value(Liquid) | 3-12≤65℃ |
Performance Curve:
Projects with SHR Rubber Pumps:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.