150S Non Metalic Vertical Centrifugal Sump Pump Elastomer Molded 110Kw
Non Metalic Vertical Slurry Pumps , Elastomer Molded Slurry Pumps
Introduction:
Vertical pumps from SME not only provide excellent wear life properties, they also operate efficiently to further reduce operating costs. These vertical slurry pumps can be fully elastomer lined or hard metal fitted. There are no submerged bearings or packing with a unique high capacity double suction design. Optional recessed impeller and suction agitator are available. The innovative product design and widely configurable range help our customers reduce costs. At SME, SV are metal lined sump pumps, whereas SVR are rubber lined instead.
Features and advantages of SME SVR rubber lined vertical slurry pumps:
Low maintenance and long life, Low on power consumption, Less wear and tear of parts, thus economical. Looking for rubber lined horizontal/vertical slurry pumps? Call us at +86 311 66692398.
Specifications:
| Model | SVR-150S |
| Capacity | 108-479.16m3/h |
| TDH | 8.5-40m |
| Rated Motor Power | 110Kw |
| Speed | 500-1000r/min |
| Max. Efficiency | 52% |
| Standard Shaft Length | 1800mm |
Construction of Vertical Slurry Pump:
Materials of Construction:
| Part Description | Material |
| Casing | - Black Natural Rubber |
| Impeller | - Black Natural Rubber |
| Back Liner | - Black Natural Rubber |
| Shaft | Carbon Steel |
| Mounting Plate | Mild Steel |
| Strainers | Synthetic Rubber |
Specifications:
| Natural Rubber | Standard |
| Hardness(Shore A) | 52±3 |
| 300% Stretching Strength(MPa) | ≥4 |
| Tensile Strength(MPa) | ≥21 |
| Elongation at Break(%) | ≥500 |
| Tensile Set at Break(%) | ≤25 |
| Rubber to Metal Bonding Pull Strength(MPa) | ≥5 |
| Akron Abrasion cm3/1.61km | ≤0.08 |
| Acid & Alkali Resistant PH Value(Liquid) | 3-12≤65℃ |
Performance Curve:
Projects with Vertical Slurry Pumps:
SME SPR Sump Pump Orders:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.