Industrial Submersible Sump Pump For Dirty Water With Interchangeable Spare Parts
Submersible Pump For Dirty Water , Vertical Sump Pump with Interchangeable Spare Parts
Introduction:
Vertical submersible pump is centrifugal slurry pump, is used to absorb a liquid is used to transport corrosive solution with large grain and high density.
Do not need any shaft seal and the shaft seal water, under the working condition can not afford the amount of suction, and can normally be used.
The pump housing is a wear-resistant metal impellers are made of wear-resistant metal or rubber, the material of the polyamine fat.
Spare parts for pump liquid with kauchkom. Suitable for transportation of corrosive slurry solution.
Specifications:
| Model | SVR-65Q |
| Capacity | 22.5-105m3/h |
| TDH | 5.5-30.5m |
| Rated Motor Power | 30Kw |
| Speed | 700-1500r/min |
| Max. Efficiency | 51% |
| Standard Shaft Length | 1200mm |
Construction of Vertical Slurry Pump:
Materials of Construction:
| Part Description | Material |
| Casing | - Black Natural Rubber |
| Impeller | - Black Natural Rubber |
| Back Liner | - Black Natural Rubber |
| Shaft | Carbon Steel |
| Mounting Plate | Mild Steel |
| Strainers | Synthetic Rubber |
Specifications:
| Natural Rubber | Standard |
| Hardness(Shore A) | 52±3 |
| 300% Stretching Strength(MPa) | ≥4 |
| Tensile Strength(MPa) | ≥21 |
| Elongation at Break(%) | ≥500 |
| Tensile Set at Break(%) | ≤25 |
| Rubber to Metal Bonding Pull Strength(MPa) | ≥5 |
| Akron Abrasion cm3/1.61km | ≤0.08 |
| Acid & Alkali Resistant PH Value(Liquid) |
3-12≤65℃ |
Performance Curve:
Projects with Vertical Slurry Pumps:
SME Sump Pump Orders:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.