Rubber Lined Slurry Sump Pump For Copper Ore Vertical Cantilever Sump Pump
Rubber Lined Sump Suction Vertical Slurry Pumps For Copper Ore
Introduction:
Semi-submersible slurry pumps are vertical, to operate in the liquid obstanovket. This series is a single-cabinet design of the pump, so that has a lower weight, small size, easy to operate and maintain.
The body pumps «SVR» is made of wear-resistant metal alloy. The submerged part of the pump series «SVR» coated with elastomer (rubber), which allows pumping corrosive slurry with small particles.
Specifications:
| Model | SVR-100R |
| Capacity | 54-289m3/h |
| TDH | 5-35m |
| Rated Motor Power | 75Kw |
| Speed | 500-1200r/min |
| Max. Efficiency | 56% |
| Standard Shaft Length | 1500mm |
Construction of Vertical Slurry Pump:
Materials of Construction:
| Part Description | Material |
| Casing | - Black Natural Rubber |
| Impeller | - Black Natural Rubber |
| Back Liner | - Black Natural Rubber |
| Shaft | Carbon Steel |
| Mounting Plate | Mild Steel |
| Strainers | Synthetic Rubber |
Specifications:
| Natural Rubber | Standard |
| Hardness(Shore A) | 52±3 |
| 300% Stretching Strength(MPa) | ≥4 |
| Tensile Strength(MPa) | ≥21 |
| Elongation at Break(%) | ≥500 |
| Tensile Set at Break(%) | ≤25 |
| Rubber to Metal Bonding Pull Strength(MPa) | ≥5 |
| Akron Abrasion cm3/1.61km | ≤0.08 |
| Acid & Alkali Resistant PH Value(Liquid) | 3-12≤65℃ |
Performance Curve:
Projects with Vertical Slurry Pumps:
SME SPR Sump Pump Orders:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.