Heavy Industry Slurry Sump Pump Anti - Corrosion Vertical Sump Pump
Heavy Industry Sump Pump With Anti-Corrosion Natural Rubber Parts
Introduction:
SPR series centrifugal slurry pumps applications:
Heavy industry applications;
Abrasive and corrosive service;
Ready mix concrete;
Features :
1. SP (R) type submerged pumps are vertical centrifugal slurry pump, generally into the pool or pit to
work,used to transport abrasive, coarse particle, high concentration slurry.
2. Don't need any shaft seal and shaft seal water, in the inhaled volume insufficient conditions they
can also work normally.
3. SP (R) type submerged pumps' pump body is made of wear-resisting metal. Impeller is made of
wear-resistant metal or rubber, polyurethane SP (R) type submerged pumps parts into the liquid with
rubber lining,they are all applicable to transport corrosive slurry.
Specifications:
| Model | SVR-150S |
| Capacity | 108-479.16m3/h |
| TDH | 8.5-40m |
| Rated Motor Power | 110Kw |
| Speed | 500-1000r/min |
| Max. Efficiency | 52% |
| Standard Shaft Length | 1800mm |
Construction of Vertical Slurry Pump:
Materials of Construction:
| Part Description | Material |
| Casing | - Black Natural Rubber |
| Impeller | - Black Natural Rubber |
| Back Liner | - Black Natural Rubber |
| Shaft | Carbon Steel |
| Mounting Plate | Mild Steel |
| Strainers | Synthetic Rubber |
Specifications:
| Natural Rubber | Standard |
| Hardness(Shore A) | 52±3 |
| 300% Stretching Strength(MPa) | ≥4 |
| Tensile Strength(MPa) | ≥21 |
| Elongation at Break(%) | ≥500 |
| Tensile Set at Break(%) | ≤25 |
| Rubber to Metal Bonding Pull Strength(MPa) | ≥5 |
| Akron Abrasion cm3/1.61km | ≤0.08 |
| Acid & Alkali Resistant PH Value(Liquid) | 3-12≤65℃ |
Performance Curve:
Projects with Vertical Slurry Pumps:
SME SPR Sump Pump Orders:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.