3 / 2 Open Impeller Corrosion Resistant Rubber Centrifugal Slurry Pumps
Slurry Pump With Corrosive Resistant Feature Rubber Lined
Introduction:
Pump 3/2C-R is mostly used for the building industry handling ashes of building blocks.The discharge size of SHR-50C is 2-inch, and the maximum electric motor the pump can be driven is 30Kw.
Wear material selections are key in each mineral application due to the various erosive or corrosive nature of each mineral.
Specifications:
| Model | SHR-50C |
| Outlet | 2-inch |
| Capacity | 36-75.6m3/h |
| TDH | 13-46m |
| Rated Motor Power | 30Kw |
| Speed | 1300-2300r/min |
| NPSH | 2-4m |
Construction of Rubber Slurry Pump:
Typical Applications:
Tailings
Heavy Mining
Ash Handling
Cyclone Feeds
Pulp and Paper
Corrosive Slurries
Coal Preparation
Mineral Processing
Aggregate Processing
Heavy Refusal Removal
Standard Material of Wet-end Parts: Natural Rubber
| Natural Rubber | Standard |
| Hardness(Shore A) | 52±3 |
| 300% Stretching Strength(MPa) | ≥4 |
| Tensile Strength(MPa) | ≥21 |
| Elongation at Break(%) | ≥500 |
| Tensile Set at Break(%) | ≤25 |
| Rubber to Metal Bonding Pull Strength(MPa) | ≥5 |
| Akron Abrasion cm3/1.61km | ≤0.08 |
| Acid & Alkali Resistant PH Value(Liquid) | 3-12≤65℃ |
Performance Curve:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.