Natural Reinforced Rubber Lined Slurry Pumps with Closed Impeller for Erosive Slurries
Natural Rubber Reinforced Slurry Pump with Closed Impeller for Erosive Slurries
Introduction:
Our slurry pumps are used in series pumping coal tailings direct from a thickener underflow, or to be used in delivering screens in a coal washery, or handling red mud tailings in an alumina plant, and also used for feeding uranium ore to thickeners in a CCD circuit at a large uranium concentrating plant.
Our slurry pumps are also used to load highly abrasive iron sand concentrate on to bulk ore carriers moored 2.8 kilometers offshore.
Specifications:
| Pump Model | SHR-100D |
| Outline | 4-inch |
| Capacity | 144-324m3/h |
| TDH | 12-45m |
| Rated Power | 60Kw |
| Speed | 800-1350r/min |
| NPSH | 3-5m |
Typical Applications:
Tailings
Heavy Mining
Ash Handling
Cyclone Feeds
Pulp and Paper
Corrosive Slurries
Coal Preparation
Mineral Processing
Aggregate Processing
Heavy Refusal Removal
Standard Material of Wet-end Parts: Natural Rubber
| Natural Rubber | Standard |
| Hardness(Shore A) | 52±3 |
| 300% Stretching Strength(MPa) | ≥4 |
| Tensile Strength(MPa) | ≥21 |
| Elongation at Break(%) | ≥500 |
| Tensile Set at Break(%) | ≤25 |
| Rubber to Metal Bonding Pull Strength(MPa) | ≥5 |
| Akron Abrasion cm3/1.61km | ≤0.08 |
| Acid & Alkali Resistant PH Value(Liquid) | 3-12≤65℃ |
Performance Curve:
| Type | Size | Frame | Impeller:E4147 | Shaft Seal | Frame Rating(kw) | Normal Max Speed(r/min) | Max Passage Size(mm) |
| 100 | D/E | 5 Closed Type Rubber Vans, Diameter:365mm | Gland Packing, Expeller, Mechanical Seal | 60/120 | 1350 |
33 |
| SHR Series Rubber Lined Slurry Pump Specifations & Prices | ||||||||||||
| Pump Model |
S×D (inch) |
Allowable Max. Power (kw) |
Material | Clear Water Performance | Impeller | Pricing | ||||||
| Capacity Q | Head H(m) |
Speed n(r/min) |
Max.Eff. η% |
NPSH (m) |
No. of Vanes |
Vane Dia. (mm) |
Weight (kg) |
|||||
| Impeller | m3/h | l/s | ||||||||||
| SHR/25B | 1.5×1 | 15 | Rubber () |
10.8-25.2 | 3-7 | 7-52 | 1400-3400 | 35 | 3 | 152 | 77 | |
| SHR/40B | 2×1.5 | 15 | 25.2-54 | 7-15 | 5.5-41 | 1000-2600 | 50 | 2.5-5 | 5 | 178 | 104 | |
| SHR/50C | 3×2 | 30 | 36-75.6 | 10-21 | 13-39 | 1300-2100 | 2-4 | 213 | 154 | |||
| SHR/75C | 4×3 | 30 | 79.2-180 | 22-50 | 5-34.5 | 800-1800 | 59 | 3-5 | 245 | 236 | ||
| SHR/75D | 4×3 | 60 | 245 | 290 | ||||||||
| SHR/100D | 6×4 | 60 | 144-324 | 40-90 | 12-45 | 800-1350 | 65 | 3-5 | 365 | 454 | ||
| SHR/100E | 6×4 | 120 | 365 | 635 | ||||||||
| SHR/150E | 8×6 | 120 | 324-720 | 90-200 | 7-49 | 400-1000 | 65 | 5-10 | 510 | 982 | ||
| SHR/150F | 8×6 | 260 | 510 | 1390 | ||||||||
| SHR/150R | 8×6 | 300 | 510 | |||||||||
| SHR/200F | 10×8 | 260 | 540-1188 | 200-450 | 7-45 | 300-650 | 80 | 2.5-7.5 | 686 | 2581 | ||
| SHR/200ST | 10×8 | 560 | 540-1188 | 200-450 | 7-45 | 300-650 | 80 | 2.5-7.5 | 686 | 3130 | ||
| SHR/250F | 12×10 | 260 | 720-1620 | 320-700 | 13-14 | 300-500 | 79 | 3-8 | 762 | 2807 | ||
| SHR/250ST | 12×10 | 560 | 720-1620 | 320-700 | 13-14 | 300-500 | 79 | 3-8 | 762 | 3357 | ||
| SHR/300F | 14×12 | 260 | 1152-2520 | 380-850 | 11-63 | 250-550 | 79 | 4-10 | 965 | 4123 | ||
| SHR/300ST | 14×12 | 560 | 1152-2520 | 380-850 | 11-63 | 250-550 | 79 | 4-10 | 965 | 4672 | ||
Construction of Slurry Pump:
1. Frame Plate 2. Expeller Ring
3. Packing Gland 4. Shaft Sleeve
5. Expeller 6.Frame Plate Liner
7. Impeller 8. Cover Plate Liner
9. Cover Plate
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.