High Chrome A05 Slurry Pump Parts 6 Inch Slurry Pump Volute Liners
6 Inch Slurry Pump Volute Liners for Heavy Duty Slurry Pumps in High Chrome A05 Material
Introduction:
1. The below picture shows the volute liner for slurry pump 8/6E- in metal material, high chrome alloy A05, packaged in a wooden crate, and this volute liner was shipped to Rome, Italy.
Normally, if not requested other, we'll paint the impellers in Red color.
| Material Chemical Requirements, Weight % | ||||||||||||||||
| Designation | Material Name | C | Mn | Si | Ni | Cr | Mo | Cu | P | V | S | Description | Hardness | |||
| A03 | Ni-Hard 1 | 3.0-3.6 | 0.3-0.7 | 0.3-0.5 | 3.3-4.8 | 1.5-2.6 | 0-0.4 | ... | ≤0.3 | ≤0.15 | ||||||
| A05 | Ultrachrome | 2.92 | 0.98 | 0.54 | 0.8 | 26~28 | ≤0.8 | ... | 0.062 | .. | 0.051 | 27% Cr Erosion Resistant White Iron | 58-62HRC | |||
| A06 | NI-Hard 4 | 3.2 | 0.2 | 1.5 | 4 | 8 | 0.5 | ... | 0.15 | ... | 0.12 | Martensitic White Iron | 62-67HRC | |||
| A07 | 15/3 Chrome/Moly Iron | 2.8-3.2 | 0.5-1.2 | 0.8-1.0 | ... | 15-17 | 2.8-3.2 | 0.8-1.2 | ... | ... | ... | Chromium/Molybdenum | ||||
| A33 | 1.55 | 1.2 | 1.29 | 1.89 | 36.7 | 1.92 | 1.31 | ... | ... | ... | Corrosion-resistant Chrome | |||||
| A49 | Ultrachrome | 1.57 | 0.71 | 1.36 | 2.01 | 28 | 1.96 | 1.32 | 0.038 | ... | 0.027 | 28% Cr, Low C, White Iron | ||||
| A61 | Hyperchrome | 4.4-4.6 | 2.0-2.5 | 0.3-0.8 | ... | 30-32 | 2.5-3.0 | ... | ... | 0.2-0.3 | ... | Hypereutectic white iron | ||||
| Standard Natural Rubber | Natural Rubber for erosive applications | 65 Shore | ||||||||||||||
| U01 | Wear Resistant Polyurethane | Polyurethane Elastomer | 78 Shore | |||||||||||||
| Remarks: 1. The above different kinds of material are for for pump wet-end parts, i.e: impeller, volute liner, throatbush, frame plate liner insert, cover plate liner, frame plate liner. 2. We also have C21, C23, and they are for parts like: shaft, shaft sleeve, shaft spacer, gland assembly etc. 3. For shaft sleeves, J04, J05 and J21 are also avaiable. 4. Pump bodies (cover plate and frame plate) and pump base, bearing housing can be made of G01-grey iron, D21-ductile iron. |
||||||||||||||||
2. Data Sheet of the Metal Lined Slurry Pump 8/6E-
| Pump Model |
S×D (inch) |
Allowable Max. Power (kw) |
Material | Clear Water Performance | Impeller | ||||||
| Capacity Q | Head H(m) |
Speed n(r/min) |
Max.Eff. η% |
NPSH (m) |
No. of Vanes |
Vane Dia. (mm) |
|||||
| Impeller | m3/h | l/s | |||||||||
| SH/150E | 8×6 | 120 | A05 | 180-900 | 50-250 | 10-80 | 500-1300 | 75 | 2-9 | 6 | 545 |
3. Not only does SME offer the complete pumps, we also offer the spares for all series pumps, they include but not limited to:
-Impeller
-Metal Liner
-Rubber Liner
-Bearing Assembly
-Base
-Cover Plate & Frame Plate
-Others
4. The pump parts can be made of high chrome, a wide variety of elastomers or the latest in ceramic materials for longer service life and higher efficiency.
Materials Offered:
-High Chrome Cast Iron
-Ductile Iron
-Stainless Steel
-Natural Rubber
-Specific Rubber
-Polyurethane
Our services:
1. Quick Response. All messages or e-mail will receive a response within 8 hours
2. We can help to choose suitable pumps, if you are not sure which model of pump is suitable for you
3. We have a group of high quality technicians with rich experience that can solve all throughout the process.
4. Perfect after-sales. we will be responsible for the entire period of his life
5. OEM order. Many materials are available, both with high chromium content, rubber, stainless steel, etc.
Metal Pump Explosive View:
Slurry Pumps Orders:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.