8 Inch High Chrome Sand Gravel Pump Sg/200f With Frame F For Mining Industry
8-INCH HIGH CHROME SAND GRAVEL PUMP SG/200F WITH FRAME F FOR THE MINING INDUSTRY
INTRODUCTION/PRODUCTS FEATURES:
CNSME type SG(or SHG) series sand gravel pumps are designed for continuously handling the most difficult higher abrasive slurries which contain too big solids to be pumped by a common pump. They are suitable for delivering slurries in mining, explosive sludge in metal melting dredging in dredgers, and course of rivers, and other fields. CNSME type SHG pumps are high-head ones. The construction of this pump is of a single casing connected by means of clamp bands and wide wet-passage. The wet parts are made of N hard and high chromium abrasion-resistance alloys. The discharge direction of the pump can be oriented in any direction at all angles. This type of pump possesses the advantages of easy installation and operation good performance of NPSH and abrasion resistance
SPECIFICATIONS:
| Model | SG/200F |
| Outlet | 8-inch |
| Capacity | 400-1000m3/h |
| TDH | 10-60m |
| Rated Motor Power | 260Kw |
| Speed | 300-1100r/min |
| Max. Eff. | 65% |
| NPSH | 3-7.5m |
| Type | Size | Frame | Impeller FG8137-A05 | Shaft Seal Type | Frame Rating(KW) | Normal Max Speed(r/min) | Passage Size(mm) |
| SG | 200 | F | 3 Closed Metal Vanes, Diameter: 533mm | Gland Packing, Expeller, Mechanical Seal | 260 | 1100 | 178 |
TYPICAL APPLICATIONS:
SAND AND GRAVEL INDUSTRY
HYDRAULIC MINING
SUGAR BEET AND OTHER ROOT VEGETABLES
SLAG GRANULATION
TUNNELLING
MAIN AVAILABLE MODELS:
| MODEL | SUCTION SIZE (INCH) | DISCHARGE SIZE (INCH) |
| SG/100D | 6 | 4 |
| SG/150E | 8 | 6 |
| SG/200F | 10 | 8 |
| SHG/200S | 10 | 8 |
| SG/250F | 12 | 10 |
| SG/250G | 12 | 10 |
| SG/250TU | 12 | 10 |
| SG/300TU | 14 | 12 |
| SG/300G | 14 | 12 |
| SHG/350TU | 16 | 14 |
| SG/350TU | 16 | 14 |
| SG/400G | 18 | 16 |
| SG/400H | 18 | 16 |
Material: High Chrome Alloy A05
Material Chemical Requirements, Weight%
| Description | Material Name | C | Mn | Si | Ni | Cr | Mo | Cu | P | V | S | Description | Hardness |
| A05 | Ultrachrome | 2.92 | 0.98 | 0.54 | 0.8 | 27 | ≤0.8 | ... | 0.062 | ... | 0.051 | 27% Cr Erosion Resistant White Iron | 58-62HRC |
PERFORMANCE CURVE:
SECTIONAL DRAWING / EXPLODED VIEW:
OUTLINE DIMENSIONS:
MAIN WEAR PARTS:
| IMPELLER FG8137 | A05 HIGH CHROME ALLOY |
| FRAME PLATE FG8131 | A05 HIGH CHROME ALLOY |
| COVER PLATE FG8013 | A05 HIGH CHROME ALLOY |
| FRAME PLATE LINER INSERT FG8041M | A05 HIGH CHROME ALLOY |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.