Waterproof 15 Inch 250 Nits LED Open Frame Touch Monitor Industrial Grade
15 inch LED open frame touch screen display industrial grade
Product Specification:
1. specifications for Display equipment
| Item | Parameters | |
| Screen | size | 15’’LED |
| Resolution | ≥1280×1024★ | |
| Pixel size | 0.294mm×0.294 ★ | |
| Dynamic contrast | ≥1000:1 ★ | |
| brightness | ≥350cd/m2 ★ | |
| Display proportion | 4:3 | |
| Viewing angel | Wide angel | |
| Digital dynamic oblique direction correction | ●(support) | |
| Full digital image processing | ●(support) | |
| PC mode | ●(support) | |
| Brightness / contrast dynamic optimization | ●(support) | |
| Natural edge optimization | ●(support) | |
| The whole digital tracking noise reduction | ●(support) | |
| Digital cross color suppression | ●(support) | |
| MPEG Noise reduction | ●(support) | |
| Color information correction | ●(support) | |
|
HDMI input
|
●(support) ★ | |
| Display output | ●(support) ★ | |
| Audio output | ●(support) ★ | |
| Signal compatible*2 | 480i/480p/576i/576p/720p/1080i/1080p ★ | |
| Computer input*3 | VGA/HDMI/DVI ★ | |
2. Technical Parameters of Display
| Item | Parameters | |
| Mechanical behavior | Antiknock performance | Tempered glass, with a diameter of 63.5mm (quality 1.04Kg) smooth surface of the steel ball from the height of 1 meter free fall, the screen is not broken ★ |
| Surface durability | Surface hardness equivalent to glass, Mo hardness level ≥ 7 level | |
| Optical index | Transmittance | ≥92%,Up to 100% (no glass) |
| Light resistance | Anti-glare full angle radiation | |
| Environmental indicators | temperature range | -20℃ ～ 70℃ |
| Relative humidity | 90% RH at 40 ℃ without condensation | |
| Service life | More than 7 years, adaptable, anti-light interference, stable drift-free, oil-proof, scratch-proof, waterproof, anti-interference,★ | |
| Electrical characteristics | Operating Voltage | + 5VDC typical, allowable range + 4.75V ~ + 5.25V |
| Power supply | USB bus or PS / 2 interface, power supply ripple up to 200mVrms | |
| Safety certification | CE,FCC | |
| Interface method | USB/EIA 232E | |
| Sealing level | ≥IP65 |
3. Electronic technical indicators
| Item | Parameters |
| DC input parameters | 12V/ 5A |
| AC input parameters | 110V-230V;47-63HZ |
| effectiveness | DC full load output ≥ 87% |
| Power consumption | ≤23W |
| Ripple | +12V ＜400MV |
4. Shell technical indicators
| Item | Parameters |
| Material | Superior cold-rolled plate + high-quality tempered glass★ |
| surface | Indoor shell for the cold-rolled plate or aluminum, metal paint |
| crafts | Anti-corrosion, shockproof, anti-magnetic, anti-interference and anti-static are all available on the surface of the cabinet and the fine workpieces inside the machine. Complete insulation protection is available. There are back doors and left and right side doors for convenient maintenance.★ |
| power supply | Independent power, a key switch machine, voltage: AC 110V-230V 47-63HZ Power consumption: <25W |
| interface | composite,S-video & VGA |
| fan | No noise, circulation cooling★ |
| Exterior | Integrated industrial design, in line with ergonomic and aesthetic principles, slim cabinet, full of flavor of the times |
Projected Capacitive Touch panel:
- Projected capacitive touch panels are built with two parallel layers of ITO but, but unlike the old and cheap resistive touch panels, the ITO layers in a projected capacitive touch panel are sealed between two sheets of glass by an optically clear adhesive.
- There is no air gap between layers like in a resistive touch panel.
- The patterns on the two parallel ITO layers form a grid of capacitors.
- The electric fields of these capacitors are projected through the top layer of glass.
- When the user places a finger near the top surface of the touch panel, it couples with the electric fields.
- This coupling changes the capacitance of several of the capacitors in the vicinity of the finger.
- An algorithm converts these changes in capacitance into a location along the X and Y axes of the panel.
FAQ:
Q. Are you a factory or trading company?
A: We are a factory.
Q. Does your products have CE&Rohs certificates?
A: Yes.
Q. What’s the shipping method?
A: By sea / air / express, which methods to be used on the basis of customer’s requirements.
Q. What’s the payment methods?
A: T/T, 30% deposit before production, the balance before shipment.
Q. What size of touch screen can you manufacture?
A: 3.5” to 65”, the bigger size are researching and developing.
Application:
-- Kiosk,Karaoke -- All in one --Digital Signage -- Tablet pc
-- Advertising player -- Education Whiteboard -- Medical device
-- Industrial PC panel -- Multi-touch table -- POS
-- Restaurant menu -- ATM
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.