24 Inch 300nits AR Industrial Touch Module Industrial Grade

Installation way of Touch Panel

• In order to make a touch panel work normally, please make sure that the host device is grounded.
• All environmental characteristics listed above should be less than 1 atmospheric pressure.
• The touch panel must be assembled with LCD panel by VHB or other materials, the control board should be fixed on LCM bezel or other mechanical parts of the system and then be grounded; In ESD test, the touch panel should work normally and there should be no damage to the appearance, when no static electricity discharges. However, irregular changes like display flickering are acceptable when static electricity discharges.
• The touch panel may be damaged functionally or work unstably if the panel are not be grounded though your system to earth.
• In order to make a touch panel work normally, power supply or power adapter has to conform to IEC 62684.

• Panel Brand
  AUO/BOE/etc
• Panel Model

• Panel Size
  24.0"
• Panel Type
  a-Si TFT-LCD, LCM

• Resolution
  1920(RGB)×1080, FHD, 100PPI
• Pixel Format
  RGB Vertical Stripe

• Display Area
  531.36(W)×298.89(H) mm
• Bezel Opening
  -

• Outline Size
  556(W)×323.2(H) ×21.26(D) mm
• Surface
  Anti-Scatter, Hard coating (6H)

• Brightness
  250 cd/m² (Typ.)
• Contrast Ratio
  1000:1 (Typ.) (TM)

• Viewing Angle
  89/89/89/89 (Typ.)(CR≥10) 
• Display Mode
  AMVA3, Normally Black, Transmissive

• Best View on
  Symmetry
• Response Time
  16/9 (Typ.)(Tr/Td)

• Display Colors
  16.7M 72% NTSC
• Lamp Type
  10S7P WLED , 30K hours , With LED Driver

• Frequency
  60Hz 
• Touch Screen
  PCAP, Air Bonding

• Panel Weight
  3.67/3.75Kgs (Typ./Max.)
• Application

•  
•  
• Signal Interface
• LVDS (2 ch, 8-bit) , 30 pins Connector

•  
•  
• Input Voltage
• 5.0V (Typ.)

•  
•  
• Environment
• Operating Temp.: -10 ~ 60 °C ; Storage Temp.: -20 ~ 70 °C

Product in actual application example