5x5mm 145g Fiber Mesh For Wall Building , Structure Internal And External Surface Enhancement

Introduction

Fiber Mesh is* based on medium-alkali or alkali-free glass fiber woven fabric, which is processed by alkali-resistant coating. The product has high strength and good alkali resistance, and plays an important structural role in the insulation system, mainly to prevent the occurrence of cracks. Due to its excellent resistance to chemical substances such as acid and alkali, and high tensile strength in the warp and weft directions, the stress on the external wall insulation system can be evenly dispersed, and the entire insulation caused by the collision and extrusion of external impact can be avoided. The deformation of the structure makes the insulation layer have a high impact strength, and is easy to construct and control the quality. It plays the role of "soft steel bar" in the insulation system.

Construction method

1. Keep the walls clean and dry.

2. Put tape on the cracks and press tightly.

3. Make sure that the gap is covered by tape, then use a knife to cut off the excess tape, and finally apply the mortar.

4. Let it air dry, then lightly sand.

5. Fill enough paint to make the surface smooth. 6. Cut off the leaking tape. Then, notice that all the cracks have been properly repaired, and use fine composite materials to modify the surrounding areas of the joints to make them look as clean as new.

Product Features

1. Good chemical stability. Alkali resistance, acid resistance, water resistance, cement erosion and other chemical corrosion; And resin bond strong, soluble in styrene and so on.

2. High strength, high modulus and light weight.

3. Better dimension stability, hard, flat, not easy to contract deformation and positioning.

4. Good impact resistance. (due to its high strength and toughness)

5. Anti-mildew and insect repellence.

6. Fire, heat preservation, sound insulation and insulation