Automatic Injection Molder Machine Molding Label System For Plastic Bucket IML
High efficiency, Energy-saving and high precise proportional pressure and flow variable displacement pump system make the out of the hydraulic system matching the required power for entire machine operation without loss of high pressure throttle and overflow energy. As comparedwith constant displacement pump, it saves power by 30%~60%. A motor with same power may be fitted with an oil pump of bigger displacement and thus accelerates the speed of machine.Besides, the low oil temperature will prolong the service life of sealing elements.
Buffer device is used in every mold opening and clamping oil way to ensure steady mold opening and clamping operation without any impact.Besides, differential mold clamping operation is fitted to ensure high production efficiency.
| SPECIFICATION | HJF-650 | ||||
| A | B | C | D | ||
| Screw Diameter | Mm | 90 | 95 | 100 | 105 |
| Screw L/D Ration | L/D | 20 | 19 | 18 | 17.1 |
| Shot Size(Theoretical) | cm3 | 2800 | 3117 | 3454 | 3808 |
| Injection Weight(PS) | g | 2517 | 2805 | 3108 | 3427 |
| Injection Rate | g/s | 552 | 612 | 679 | 748 |
| Injection Pressure | MPa | 184 | 165 | 149 | 135 |
| Screw Speed | rpm | 150 | |||
| Clamp tonnage | KN | 6500 | |||
| Opening stroke | Mm | 870 | |||
| Space Between Tie Bars | mm | 890*890 | |||
| Max.Mold Height | mm | 900 | |||
| Min.Mold Height | mm | 350 | |||
| Ejector Stroke | mm | 250 | |||
| Ejector Tonnage | KN | 150 | |||
| Max.Pump Pressure | MPa | 16 | |||
| Pump Motor Power | KW | 55 | |||
| Heater power | KW | 42.95 | |||
| Machine Dimension(L*W*H) | M | 10.2*2.24*2.71 | |||
| Machine weight | T | 28 | |||
| Oil Tank Capacity | L | 1300 | |||
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.