PLC Metal 10m/Min Door Frame Forming Machine With Lock Hole Station
Price:
USD$30000---40000
MOQ:
1 set
Delivery Time:
30 work days
Brand:
BEST
Product Description
Fully Automatic Metal Door Frame Roll Forming Machine With Lock Hole Station
Composition of machine:
1. 3T hydraulic decoiler
2. Entrance table-guide- flattener
3. Servo feeding and punching system
4. Feeding→roll forming→rectify device→post cutting
5. Output table
6. Hydraulic station
7. Control desk
Profile, layout & production flow:
Profile thickness between0.8-1.5mm carbon steel
Yelied strength of material: 195-235Mpa
Effective width: base on profile
Following profile in only for customer reference, the exactly can be provide by customer
Working Flow
Hydraulic decoiler→ entrance table &guide→flattening→loop→servo feeding→Punching 1→Punching 2→Punching 3→loop →feeding→roll forming→post cutting →output table
| 1: 3T hydraulic decoiler | |
| Single unrolling machine, one side can put material | |
| Adopt automatic hydraulic system for expand | |
| Coil weight (Max) | 3000kg |
| Inter diameter | 420mm-510mm |
| Maximal out diameter | 1300mm |
| Oil cylinder dia | 100mm |
| Coil width (Max) | 500mm |
| Working speed | 0-15m/min adjustable |
| Main motor power | 4KW AC motor |
| Hydraulic power | 3kw |
| Frequency converter brand | Yaskawa |
| De-coiler should be with Loop control and hold down, and with baffle for forbid coil fall down | |
| The decoiler has 4 segments | |
| Color | blue |
| Quantity | 1 set |
| 2: Entrance table guide→flattener | |
| Armed adjustable center of the forming rollers and of sufficient length to prevent lateral movement of the strip on its entry to flattene | |
| Entrance table-guide | adjustable |
| Entrance width range | 150-300mm |
| Entrance and guide roller | diameter is ￠65mm, material is sae1045, HRC48-52° surface with chrome |
| Quantity | 1 |
| The quantity of leveler rolls must be planned according to thickness 0.8mm to 1.5 mm. | |
| Flattener roller: upper is 3 rollers, down is 4 stations(total is 7 rollers) | |
| Flattener roller material | SAE 1045 thermal treatment hardness 48-52 HRC |
| Diameter of flattener shaf | ￠56mm, material is SAE 1045, hardening and tempering |
| Power | 4KW AC motor |
| Speed | 0-15m/min |
| Speed controlled by frequency converter brand | Yaskawa |
| Color | main color in blue, drive parts by yellow |
| Quantity | 1 |
| 3: Servo feeding and punching system | |
| Servo feeding system | |
| This system adopt servo feeding to make high speed and precision | |
| Servo power | 3KW |
| Servo brand | Yaskawa (made in China) |
| Feeding roller | SAE 1045 thermal treatment hardness 48-52 HRC. |
| Feeding material requirement | width min 150mm |
| Material spec | thickness between 0.8mm and 1.5mm |
| Punching (include hydraulic station) | |
| Base on customer provide punching drawing, this machine need adopt 5 units hydraulic punching system | |
| Hydraulic station with Storage tank for provides pressure oil quantity in a short period of time, to meet the requirements of speed pressure | |
| The whole punching operation should be automated and controlled by a program installed in the PC which is located in the operator's console. | |
| Hydraulic power | 7.5kw |
| Working pressure | 12-20Mp adjustable |
| 4:Feeding→roll forming→rectify device→post cutting | |
| Feeding | |
| Profile steel thickness | between 0.8mm and 1.5mm |
| Feeding system | adjustable by hand wheel |
| Feeding width range | 150-300mm |
| Feeding roller | diameter is ￠56mm, material is ASTM52100, HRC58-62egeree |
| roll forming | |
| Main motor power | 5.5kw, AC motor, side motor to save space |
| Machine Voltage, Frequency, Phase | 380 V, 50 Hz, 3Phase |
| Roll station | 17stations (base on final design) |
| Roller material | Gcr15, 58-62,HRC hardness and chrome plated surface |
| Shaft diameter | ￠65mm material: SAE1045 |
| rectify device | |
| two station safter roll forming, | |
| Function | for revise the end product up and down/ left and right to straightness |
| Roller material: Roller material | GCR15 quenched 58°-62°finishing turning CNC |
| Adjust by hand wheel | |
| Post cutting system | |
| Cutting after forming | Cut the sheet after roll forming to required length |
| Material of blade | Cr12, 58-62 HRC hardness |
| Cutting blade | 1 set |
| Cutting power | by hydraulic, 7.5KW with Storage tank |
| Working pressure | 10-20Mpa adjustable |
| Length measuring | Automatic encoder length measuring, brand: Omron |
| 5: Output table | |
| Frame | welding by tube |
| Size | about 2.0m long*0.3mwide*0.9mhigh |
| One out table with support roller | |
| Supporter roller | ASTM 1045 with chrome |
| Diameter of rollers | 55mm |
| Color | Blue |
| Quantity | 2 units |
| 6: hydraulic station | |
| Hydraulic power | 7.5kw |
| Working pressure | 12-20Mp adjustable |
| Solenoid valve | 6 groups (one for cutting) |
| Hydraulic oil | 46# hydraulic oil |
| Quantity | 1 |
| Color | blue |
| 7: Control desk | |
| Voltage, Frequency, Phase | 380 V, 50 Hz, 3Phase |
| Control panel | Button-type switch and touch screen |
| Unit of length | millimeter (switched on the control panel) |
| Language | English/Chinese |
| PLC brand | Panasonic |
| Frequency converter brand | Yaskawa, quantity: 1 |
| Touch screen | Taiwan Weinview |
Advantage of machine
1. Reasonable Price
2. High Quality
3. 12 Months Warranty
4. More Than 10 Years Experience
5. Durable
6. Reliable
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Cangzhou Best Machinery Co., Ltd
Location
Rm 1316,Bldg.B Taida International Plaza, Yunhe District Cangzhou City Hebei
Contact Person
Arno Hao