Constant Temperature And Humidity Testing Chamber High Accuracy

Price Negotiable
Price: Negotiable
MOQ: 1PC
Delivery Time: 1-3 WORK DAYS
Brand: YUYANG
Product Description

-70~+150c Climate Chamber Constant Temperature And Humidity Testing Chamber Price


Introduction:


Programmable Environmental Climate Chamber Temperature Humidity Test Chamber Climatic Temperature Humidity Test Equipment Price Equipment for testing the performance of materials in various environments and testing various materials for heat resistance, cold resistance and dry resistance, moisture resistance. Suitable for electronic, electrical, mobile phone, communication, instrument, vehicle, plastic products, metal, food, chemicai, building materials, medical, aerospace and other products testing quality.


Features:


(1) Good appearance; stainless steel is applied for the inner and outside material of the chamber, flat  knob without reaction force; easy operation.

(2) It can be installed additional testing holes according to requirements.

(3) It can store 100 sets of programme (PTN)x1000 (steps), each programme can do 9999 times or repeat unlimitedly, operation interface is English. It is with fault warning and protecting function, RS-232 communication interface, attached PC software available for far control.

(4) Multi-wing ventilator inside the machine surpasses the traditional one exposing outside. It ventilates cyclically and strongly to make temperature evenly in the chamber.

(5) Observation window: tempered glass with defroster, heating device, energy- saving illumination.

(6) Hidden water giving system: pretty appearance and convenient watering operation.


Specifications:


Capacity (L)
80
150
225
408
800
1000
Internal Size W x H x D(cm)
40 x50 x 40
50 x 60 x 50
60 x 75 x 50
80 x 85 x 60
100 x 100 x 80
100 x 100 x 100
External Size W x H x D(cm)
120×165×115
130x170x125
140x185x130
165x195x155
185x200x175
190x210x185
Temperature range
Low temperature: A: + 25 ° CB: 0 ° C, C: - 20 ° C, and D (150 ° C) : to 40 ° C, E: 60 ° C, F: high temperature - 70 °, 100℃
Humidity range
20%-98% R. H.(10%-98% R. H) : (5%-98% R. H is the special selection condition)
Analytical accuracy of temperature and humidity/ distribution accuracy
0.1°C 0.1% R.H./±2.0 °C ±3.0% R.H.
Temperature and humidity control accuracy
±0.5°C, ±2.5%R.H.
Heating/cooling time
The temperature rises about 4.0℃/ min; Cooling is about 1.0℃/ min
Internal and external material
The inner and outer boxes are made of SUS304# stainless steel plate (optional baking paint).
Insulation material
High temperature resistant high density chloroethylene formate foam insulator material
Cooling system
Air-cooled/single-stage compressor (-20°C); Two-stage compressor (-40° C-70 °C)
Safety protection device
No fuse switch, compressor overload protection, refrigerant high and low pressure protection, over humidity and over temperature protection, fuse, fault warning system, water shortage alarm protection
Accessories
Operating hole built-in glass door (optional), recorder (optional), viewing window, 50mm test hole, PL box light, partition, wet and dry ball gauze, casters, horizontal tripod
Power supply
AC220V 50/60Hz & AC380V 50/60Hz3


Standard:


GB-2423.1-89 ( IEC68-2-1 )        GJB150.4 ( MIL-STD-810D )

GB-2423.2-89 ( IEC68-2-2 )        GB2423.3-93 ( IEC68-2-3 )

GJB360.8-87 ( MIL-STD-202F )  GB2423.4-93 ( IEC68-2-30 )

GJB150.3 ( MIL-STD-810D )       GJB150.9-93 ( MIL-STD-810D )



Application:

 

Below material can be tested on the Temperature Humidity Climatic Test Chamber



Machine working condition:


Temperature: 15~35℃;

Air flow should not be blown directly to the body;

Relative humidity:≤85%RH

Air pressure:86~106Kpa

Make sure the machine without any strong vibration and airflow, no direct sunlight or other heat radiator, no high density dust or corrosive material. And keep 60cm space with other appliance or wall to make sure normal working and operation.

Get in Touch

Have questions about our products or want to discuss a custom order? Our team is ready to help you.

Company DONGGUAN YUYANG INSTRUMENT CO., LTD
Location B1505, FORTUNE PLAZA, No.1, Yuanmei Road, Nancheng District, Dongguan City, Guangdong Province, China
Contact Person Yannis Ye

Request A Quote

Please check your email address.
Your message must be at least 20 characters.