Circuit Integrity Fire Conditions Apparatus, BS 6387 Fire Testing Equipment

Description:

Fire-resistant cable refers to the cable that can keep a safe running time in the case of flame combustion. Fire Resistance Tester is designed according to the requirements of IEC60331-11, and used to obtain the refractory characteristics of a fire resistant cable or optical cable under flame conditions.
 

User' s Experience:

1, This cabinet is made of stainless steel, anti-smoke and gas corrosion.
2, The control system is designed with a high degree of automation, automatic ignition, temperature and time digital display, convenient to observe and record, stable and reliable.

Standards:

IEC 60331 Part 11
IEC 60331 Part 21

Main Features:

1, All fixtures are made of stainless steel;
2, The burner is a belt type propane blowtorch with a Venturi mixer, and the burner nozzle is length 500mm, width 15mm;
3, Those burning holes are staggered into 3 rows, and the front width is 15mm, holes diameter is 1.32mm and these holes center distance is 3.2mm;
5, One end of the specimen holder is equipped with a clamp to fix the sample, and the other end is convenient for heat transfer along the longitudinal specimen;
6, The cable sample is supported by two metal rings, and the middle length of the two rings is about 300mm;
7, An inner diameter of the sample supporting metal rings is 150mm, and the cross-sectional diameter of the ring is 10 ± 2mm.
8, The position of the burner torch from burning the bottom is not less than 200mm, and not less than 300mm from the tank wall.

Combustion System:

1, Independent standard electrical control platform;
2, With intelligent detection function, when a short circuit in the sample during the test, automatic alarm and turn off the fire source.
3, Fuse current in the experimental circuit is 2A;
4, The sample is applied to power of AV 100V ~ 1000V adjustable;
5, The time can be set free for the fire, the time recommended by standards is 90min.

Device parameters:

1, Voltage: AC 380V 3-phase, 50 / 60Hz, 30A;
2, The input voltage 0 ~ 1000V; can be adjusted;
3, The breakdown current is 2A;
4, Maximum power: 5000VA;
5. Timer: 0 ~ 999min
6, The flame temperature of 0 ~ 1100 ºC adjustable;
7, The test load current is 0.25A, can be adjusted;

Specification: