4x2 Drive 139kw Power Emergency Rescue Vehicle with 12m Lifting Light Tower
4x2 Drive 139kw Power Emergency Rescue Vehicle with 12m Lifting Light Tower
Vehicle
| Dimension (L×W×H) | 6705×2200×3210mm |
| Gross weight | 8150kg |
| Complete vehicle shipping mass | 3925kg |
| Electric generator rated power | 50kw |
| Seat (inc. driver) | 3 |
| Rated power | 139kw |
Chassis
| Manufacturer | Isuzu |
| Model | QL11009KARY |
| Drive type | 4x2 |
| Cab | Original X-P301 |
| Wheelbase | 3815mm |
| Max. speed | 95km/h |
| Min. turning diameter | ＜15 |
| Engine type | In-line four-cylinder, high pressure common rail, water inter-cooling |
| Model | 4HK1-TCG40 |
| Max. power | 139kw |
| Max. torque | 510N•m |
| Emission standard | China IV |
| Clutch | Diaphragm spring, monolithic, dry, hydraulic power assisted |
| Gearbox model | Manual, 6 forward gear |
Main lamp
| Manufacturer | FIRECO SRL |
| Qty | 8 |
| Power | 8×2 kW |
| Voltage | 380VAC |
| Poles | 4 |
| Rated line voltage | 400VAC |
| Rated phase voltage | 230VAC |
| Frequency | 50Hz |
| Light source | Metal halide lamp |
| Protection grade | IP65 |
| Shell material | Toughened glass |
| Weight | 132kg(except ballast, holder) |
| Lighten time | Cold start: about 10mins |
Pneumatic lifting poker
| Manufacturer | FIRECO SRL |
| Model | CI3912NI |
| Lift height | ≥12 m |
| Contraction | 2m |
| Diameter | 250 mm |
| Load | 200kg |
Wireless intelligent controller
Wireless control function:
Holder level/pitching, one key automatic reset, lifting control, operating warning light.
Equipment layout principles
1, According to combat programming and combat development design equipment integration.
2, According to human body engineering principle design all kinds of equipment frames.
3, According to using logic and frequency of use place equipment
4, 1-2 action can take any equipment standing on the ground or pedal
5, Fixed all equipment with rust-proof, vibration-proof, anti-drop, scratch-proof special clamp.
Pedal plate
Location: At the bottom of roller shutter door.
Material: Steel frame covered by aluminum alloy checkered plate.
Structure: adopt the gas springs plus shutter fasten, safe and reliable, each petal plate bearing ≥150Kg.
FAQ:
1. Q:Are you a factory or a trade company?
A: Shanghai Jindun Special Vehicle equipment Co., LTD is one of the biggest factories for special vehicles in China.
2. Q:Where is your factory located?
A:We are located in Shanghai Province,China.
3. Q:What's your payment method?
A: T/T and L/C are preferred.
4.Q:Do you arrange shipment for the vehicles?
A:Yes, we can arrange shippment based on trade terms.
5. Q: How is the packing?
A:All the packing comply with exporting standard.
Any other questions, please do not hesitate to contact with us.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.