High Safety Solar Power Inverter 48VDC Nominal Input Voltage LIFEPO4 Battery
Price:
Negotiable
MOQ:
1 Unit
Delivery Time:
20 days after receving 30% deposid
Brand:
CONSNANT
Product Description
Litium motor cabinet energy storage system
The lithium motor cabinet energy storage system consists of high-performance lithium battery,BMS battery management system.photovoltaic charging device,inverter device,and corresponding combination to form a multi-capacity,power,functional energy.
Features
- Modular design and it will be easy installation and maintenance.
- High performance and high safety lithium iron phosphate battery has long cycle life,safety,energy saving and environment protection.
- Using intelligent management technology to extend battery life.
- According to customer customization,it can be connected to the grid and run off the network,supporting multi machine parallel operation.
- Micro grid control functions can be used as a micro grid control center to coordinate and match photovoltaic chargers,inverters and other power generation equipment according to load requirments.
- With perfect overload protection,over temperature protection,output short circuit protection,input under-voltage protection,input over-voltage protection and other functions,stable performance,high product safety and reliability.
- It desighed with the LCD display,easy to monitor and management.
Operation Principle:
Energy storage in power system including solar panels,inverter(for AC and DC conversion),and provide backup power for the main electrical backup lines.Household electricity demand different choice of different components.
Parameter:
| Battery cell | |||
| Rated capacity | 50KW 1000AH | 75KW 1600AH | 100KW 2100AH |
| Battery type | lIFEPO4 battery | ||
| Model of cell | 302V 65A Square aluminum shell | ||
| Battery group array | 16s15p | 16s23p | 16s30p |
| Voltage range of battery group | 44V-57.6V | ||
| Cycle life | 4000 cycles at 80%DOD | ||
| Protection | Short Circuit Protection ,Over Charge Protection,Over Discharge Protection,Reverse Polarity Protection,Cell Over Voltage,Cell Under Voltage and Over Temperature | ||
| Charge | |||
| Battery charge temperature | 0-50℃ | ||
| Maximum charge voltage | 50±0.5V | ||
| Rated charge voltage | 58.4±0.4v | ||
| Nominal charge current | 200A | 300A | 380A |
| Discharge | |||
| Battery working temperature | `-20℃~60℃ | ||
| Allowable maximum discharge current | 250A 1min | 250A 1min | 250A 1min |
| Rated allowable maximum discharge current | 200A | ||
| Discharge termination voltage | 40 | ||
| Self Discharge Rate | Less than 3% per month (nominal temperature) | ||
| Inverter | |||
| Type | Stand-alone Inverter(Off Grid Inverter) Single phase output transformer or galvanic isolation | ||
| Rated power | 5.0kw7.5kw10kw Remark:AC output power continuously 5.0KW/7.5KW/10KW at electrical load type:Unity power factor(pf=1) | ||
| Nominal Input Voltage | 48VDC | ||
| Output voltage | 110V-220VAC | ||
| Output voltage regulation | Less than 5% at steady state load | ||
| Total harmonic distortion(THDv) | Less than 4%when the electrical load is 0.8 lagging power factor | ||
| Maximum surge power | 200% of nominal power | ||
| Maximum running current | 75 | ||
| Overload ability(10min) | 110% | ||
| AC input frequency range | 50HZ/60HZ(automatic tracking) | ||
| Output efficiency | 50HZ/60HZ±0.3HZ | ||
| Wave form | ≥85% | ||
| Protection | Pure sine wave form | ||
| Communication | Overload,Short Circuit,Over Input Voltage,DC Reverse Polarity,Battery Low Voltage Cut Off(automatic reconnect)and Over Temperature | ||
| Solar Charge Controller | |||
| Max PV input power at STC | 5KW | 7.5KW | 10KW |
| (Standard Test Condition) | |||
| Output voltage charger to battery | 48VDC | 48VDC | 48VDC |
| MPPT(Mximum power point tracking)charger at STC | 5KW | 7.5KW | 10KW |
| Charger and Discharge controller as SOC(Stage of Charge) | |||
| Charge Controller can communicate with BMS of all LFP battery and can control,setting,display data to LCD display | |||
| Battery Reverse Polarity Protection | |||
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Shenzhen Consnant Technology Co., Ltd.
Location
Building B6, Junfeng Industrial Park, Fuyong Town, Bao'an District, Shenzhen City, 518103 P.R.China
Contact Person
Kevin Huang