Thermoplastics Pipes Iso180 Charpy Impact Tester For Fluids Determination Transport
Thermoplastics pipes for the transport of fluids-Determination of impact by the charpy method
Ⅰ. Use:
Used to test the anti-impact property of thermoplastic pipes,engineering plastics.glass,pottery,cast stone and other non-metallic materials.
Ⅱ. Principle:
A small section of pipe or machined gap-free strip specimen was preprocessed at the specified test temperature.The sample is then supported in the horizontal direction, with a quick impact at the support line with a swing hammer with a given impact energy.After an impact on the specified number of samples, the test results are identified as the percentage of the number of sample damages against the total number of samples tested.
Ⅲ. Technical Parameters
| Model | XJJ-50J |
| Impact speed | 3.8m/s |
| Impact energy | 15J, 50J |
| Pendulum moment | Pd15=7.733Nm, Pd50=25.777Nm |
| Rising angle | 160° |
| Distance between centers of pendulum and specimen | 380mm
|
| Grip round edge radius | (1 ± 0.1)mm |
| Impact blade corner dimensions | (30 ± 1)° |
| Impact blade round edge radius: | (2 ± 0.5)mm |
| Display | The dial shows |
| Standards | ISO9854,ISO180,GB/T1043,JB/T8761 |
Ⅳ. Configuration List
| No | Item | Quantity |
| 1 | Main frame | 1 set |
| 2 | 15J pendulum weight | 1 set |
| 3 | 50J pendulum weight | 1 set |
| 4 | Centering plate(span 40,70) | 3 sets |
| 5 | Inner hexagon spanner(s=5,8) | Each 1 set |
| 9 | Operation manual | 1 set |
| 10 | Warranty card | 1 set |
| 11 | Packing list | 1 set |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.