Pasia Honeycomb Products Co., Ltd
                                                                                                           
Verified Supplier
18 Years
Since 2008
Menu

15mm Structural Composite Sandwich Panels , Stainless Steel Ceiling Panels For Ship

Price Negotiable
Price: Negotiable
MOQ: 100 m2
Delivery Time: within two weeks after order and down payment for MOQ quantity
Brand: Pasia
Product Description

15 mm Stainless Steel Aluminum Honeycomb Panel for Ship or Yacht Wall Panels

 

Product Description

 

The stainless steel honeycomb panel can be used for the indoor and outdoor decoration. It can be also used on the shipbuilding industry with the panels to be used on the partition wall of kitch, washroom and so on.

 

Stainless steel is used for buildings for both practical and aesthetic reasons. Stainless steel was in vogue during the art deco period. The most famous example of this is the upper portion of the Chrysler Building. Some diners and fast-food restaurants use large ornamental panels and stainless fixtures and furniture. Because of the durability of the material, many of these buildings retain their original appearance.


Type 316 stainless is used on the exterior of both the Petronas Twin Towers and the Jin Mao Building, two of the world's tallest skyscrapers.

 

The Parliament House of Australia in Canberra has a stainless steel flagpole weighing over 220 tonnes (240 short tons).

 

The aeration building in the Edmonton Composting Facility, the size of 14 hockey rinks, is the largest stainless steel building in North America.

 

General Description

 

Stainless Steel Honeycomb Panel is comprised with two stainless steel plates and one aluminum or stainless steel honeycomb core layer. The upper surface can be colorful oxidation film coated or diamond anti-skidding pattern stainless steel plates. The colorful oxidation film performs well on corrosion resistance and cannot be peered off by mechanical friction.

 

In metallurgy, stainless steel, also known as inox steel or inox from French "inoxydable", is a steel alloy with a minimum of 10.5% chromium content by mass.


Stainless steel does not readily corrode, rust or stain with water as ordinary steel does. However, it is not fully stain-proof in low-oxygen, high-salinity, or poor air-circulation environments. There are different grades and surface finishes of stainless steel to suit the environment the alloy must endure. Stainless steel is used where both the properties of steel and corrosion resistance are required.

 

Stainless steel differs from carbon steel by the amount of chromium present. Unprotected carbon steel rusts readily when exposed to air and moisture. This iron oxide film (the rust) is active and accelerates corrosion by forming more iron oxide; and, because of the greater volume of the iron oxide, this tends to flake and fall away. Stainless steels contain sufficient chromium to form a passive film of chromium oxide, which prevents further surface corrosion by blocking oxygen diffusion to the steel surface and blocks corrosion from spreading into the metal's internal structure, and, due to the similar size of the steel and oxide ions, they bond very strongly and remain attached to the surface.

 

 

Characteristics:

 

No. Properties
1 Variety of colors for selection with various of pattern
2 Good corrosion resistance, greatly better than the stainless steel of the same type and the original color.
3 Heat Resistance, soaked in boiling water for 28 days or exposed at the 200 °C for long time, no change on the color and luster.
4 Abrasion resistance and good scratch performance, no color change after eraser friction more 2000 times at the pressure 500g/cm2.
5 film flexibility, after 180°T bend test and 8mm cupping test, film is without any change.
6 Scrubbing resistance, applicable on washing with any organic solvent, neutral detergent or water if there is dirt on the surface.
7 Anti-pollution performance, the surface can be restored by washing.
8 aging resistance better than regular stainless steel
9 possessing advantages of the honeycomb panel: 1) lower density and big flexural rigidity; 2) super flat surface; 3) good performance on sound absorption and insulation as well as thermal insulation
10 safe on fire resistance: A2 grade
11 environmental: recyclable

 

 

Application

 

Applicable on hotel, entertainment venues, high level exclusive shops, elevator panel, hall wall panel, carriage panel, backdrop, ceiling, decoration and signboard.

 

Get in Touch

Have questions about our products or want to discuss a custom order? Our team is ready to help you.

Company Pasia Honeycomb Products Co., Ltd
Location 1200 N Fuxing Rd Wutong District 314500 Zhejiang P. R. China
Contact Person Warren Sun

Request A Quote

Please check your email address.
Your message must be at least 20 characters.