M5 Threased Self Lock 304 Stainless Steel Wire Linear Light Hanging Kit

Our adjustable connectors easily adapt to the most common applications on the market,

providing a suspension system that is easy to install and almost invisible when it is set up.

If you have a project that involves an unusually sloped, curved or high ceilings, our track

suspension systems may be the solution for you. It is affordable, flexible and easy to install.

This Suspension Kit for LED Linear is the perfect solution for the Linear lights.

It features a height-adjustable stainless steel cable.

As it's made from brass+304 stainless steel wire, it's resistant, strong and flexible. 

Grippers

Compact designed grippers allow swift installation and instant adjustment without damaging the wire.

We have many different gripper models to choose from, depending on your area of usage and weight capacities.

Wires

Stainless steel and zinc-plated wires are available in various dimensions and lengths.

Wires with loops or nipples can be obtained after consultation with our technicians.

Attachments

Attachments are used to fix the wire to ceilings, walls or floors.

Ensure that you use suitable screws and dowels for the materials when installing.

For use in offices, conference rooms, reception areas, classrooms,

retail displays, replacement and retrofit applications.

How to Install the Cable Grippers?
 

A.Insert the cable into the gripper. Always insert the cable through the pin unless otherwise stated.

B.Adjust the gripper up. When you let go of the gripper it will automatically lock itself on the cable.

C.Press the pin and adjust down. When you press the pin the lock opens and the gripper slides

freely up and down the cable. Release the pin to lock the gripper again.

Except for the ceiling attachments, our cable grippers are all fitted in the same way and once installed,

the full load is attached to the holder and will no longer move.

The cable in the ceiling attachments is held in with a stop ferrule,

in all the others there are ball bearings which grip the cable.

To installthe Grips,gently depress the spring-loaded plunger (the pipe sticking out of the cable
holder) and insert one end of the cable into it.

Some of the our grippers have a screw nut over the plunger. Where these are present,undo the screw
nut completely before depressing the plunger.

Thread the cable through the holder as required,but at least far enough to be able to clearly see it
protrude from the other end of the holder.

Release the plunger to attach the load.The cable is gripped by ball bearings inside the fitting.

Once the holder is in the desired position, if it has a safety-nut, screw it down as far as possible by
hand (do not use tools).

To adjust,simply reverse the procedure:completely unscrew the safety-nut ,press the spring-loaded
plunger with your finger.Move the holder up and down the cable as required.Screw the nut back again.