Ceiling Connector Three Branch Outlet Hardware Nickel Plated YW86271

Application:

 
1. On a drywall or wood ceiling, simply use an anchor (drywall) or screw to install 

4. These adjustable sign hanger kits can also be used in art installations, in shop window displays as well as in industrial applications such as suspending safety signs.

• Extremely rapid installation
• Reusable for a future project
• Very compact design & strong termination
• No special tools needed. Simply fit & adjust by hand!
• Will accommodate cable from 0.8mm-1.25mm.
• Use for light suspension applications, as a stop for example for light shelves.
• Nickel-plated brass

The three legs hanger part is designed for architectural lighting suspensions where aesthetics are important and offers simple one-handed adjustment and a range of feet options to accommodate many types of luminaires.

Easy to use

A.Insert the cable into the gripper. Always insert the cable through the pin unless otherwise stated.

B.Adjust the gripper up. When you let go of the gripper it will automatically lock itself on the cable.

C.Press the pin and adjust down. When you press the pin the lock opens and the gripper slides freely up and down the cable. Release the pin to lock the gripper again.

What is the difference between 1x19, 7x7, and 7x19 configurations?
 

The 1x19 cable is slightly stronger than the other cables but is the least flexible. It is also the nicest looking cable due to the fewer strands of wire that make it up.
The 7x7 cable is semi-flexible, has a lesser breaking load than compared to the 1x19, but greater than 7x19.
The 7x19 cable is the most flexible, which allows it to loop back on itself without kinking. 

Warm tip
 

The max load-bearing of the according to the cable, please don't use it in the stuff of exceeding weight to avoid danger. If you want to try, Please be careful.