Cheap galvanized and portable steel horse stable stalls design with door

Planning includes more than selecting a fence type. It is best to develop an overall plan where the aesthetics, chore efficiency, management practices, safety, and finances are considered. The best planning involves a layout drawn to scale that shows proposed gates, fence lines, where fences cross streams or other obstacles, irregular paths along a stream or obstacle, traffic routes for horses and handlers, routes for supplies and water, vehicle traffic routes, and access for mowing equipment. All these should be in relation to buildings and other farmstead features.

Select and install fencing that allows easy access to pastures and does not limit performance of stable chores. Gates should be easy to operate with only one hand so the other hand is free. Fencing should also allow easy movement of groups of horses from pasture to housing facilities. All-weather lanes should connect turnout areas to the stable. Lanes can be grassed or graveled depending on the type and amount of traffic that use them. Make sure they are wide enough to allow passage of mowing equipment and vehicles. Vehicles such as cars, light trucks, and tractors can be up to 8 feet wide. Farm equipment needs 12-to 16-foot-wide lanes to comfortably negotiate. Narrower lane widths are acceptable for smaller tractors or mowing equipment. Remember to leave room for snow storage or removal along the sides of lanes and roads.

Triton horse stalls are designed with the safety of both horse and owner in mind. All stall panels are heavy walled, solid welded one piece frame construction. All horse stall panels are designed to prevent cribbing or chewing on wood inserts.

These easy to install grillwork bars are economical and rugged. They will turn your barn into a showplace. These 16-gauge galvanized steel bars can withstand the abuse versus other horse stalls that use aluminum bars (which bend very easily and can cause severe injuries!).

What sets RAMM's horse stall grill bars apart is that they can be easily removed from the grillwork. This allows you to be able to customize your horse stalls with feed openings and/or feed doors down the road if your horse’s needs change or if you ever decide to move (property value+). They are compatible with any of our Derby or Essex horse stall systems.

Horse Stall Specifications

Front Type:Sliding, European or customized

Common Size:Length: 10ft, 12ft, 14ft (3.0m -4.2 m )    Height: 7.2ft (2.2m)

Surface Treatment:  Hot dipping galvanized; Black Powder coated

Infill material: Bamboo:20mm 28mm 32mm 38mm               Southern yellow pine: 30mm 40mm

Frame:50x50mm RHS; 102/114 OD Mid-post

Fittings:

Swivel feeder system (optional)

Swing feeder window (optional)

Hay Rack (optional)

Corner post (optional)

Stainless steel latch

Decorative caps (Brass or 304SS)

Related Products:  Horse stall box; Barn door; Barn window; Horse rubber mat; Horse panel

Product display: