Galvanized Steel Peel & Press Insulation Hangers 50x50x2.7mm On Duct Or Wall Surface
Galvanized Steel Peel & Press Insulation Hangers 50x50x2.7mm On Duct Or Wall Surface
Specifications Of The Peel & Press Insulation Hangers:
Peel & Press Insulation Hangers has a fabricated 2" x 2" metal base with self stick adhesive
on it and a pin. Peel the release paper from the metal base and firmly press the base to the
duct or wall surface. Once the insulation material is pierced onto the pins, a self locking washer
or a dome cap washer is needed to hold the insulation material in place.
| The following are some popular sizes in the market, special size also could be customized. | ||
| Pin diameter | Base plate size | Insulatiion pin length |
| 12ga, 3mm, 10ga | 2 " square w / tape | 1 " |
| 12ga, 3mm, 10ga | 2 " square w / tape | 1 - 5 / 8 " |
| 12ga, 3mm, 10ga | 2 " square w / tape | 2 " |
| 12ga, 3mm, 10ga | 2 " square w / tape | 2 - 1 / 2" |
| 12ga, 3mm, 10ga | 2 " square w / tape | 3 - 1 / 2" |
| 12ga, 3mm, 10ga | 2 " square w / tape | 4 - 1 / 2" |
| 12ga, 3mm, 10ga | 2 " square w / tape | 5 - 1 / 2" |
| 12ga, 3mm, 10ga | 2 " square w / tape | 6 - 1 / 2" |
| 12ga, 3mm, 10ga | 2 " square w / tape | 8 " |
|
Advantages Of The Peel & Press Insulation Hangers:
1. The pins are riveted on the base of the insulation hangers, it's very strong. 2. The self adhesive tape on the base botom of the insulation hangers is very sticky. 3. The self locking washers are very hard, it could lock the insulation hangers very firmly.
|
||
  |
||
Self Locking Washers For The Peel & Press Insulation Hangers:
| Self Locking Washers Used To Fasten Peel & Press Insulation Hangers | |||
| type | size | material | center hole |
| round | 25mm | galvanized steel, stainless steel, aluminum | 2mm-5mm |
| round | 30mm | galvanized steel, stainless steel, aluminum | 2mm-5mm |
| round | 32mm | galvanized steel, stainless steel, aluminum | 2mm-5mm |
| round | 38mm | galvanized steel, stainless steel, aluminum | 2mm-5mm |
| square | 32mmx32mm | galvanized steel, stainless steel, aluminum | 2mm-5mm |
| square | 29mmx31mm | galvanized steel, stainless steel, aluminum | 2mm-5mm |
| square | 38mmx38mm | galvanized steel, stainless steel, aluminum | 2mm-5mm |
| square | 50mmx50mm | galvanized steel, stainless steel, aluminum | 2mm-5mm |
| square | 65mmx65mm | galvanized steel, stainless steel, aluminum | 2mm-5mm |
| dome cap | 30mm | galvanized steel, stainless steel, aluminum | 2mm-5mm |
| dome cap | 32mm | galvanized steel, stainless steel, aluminum | 2mm-5mm |
| dome cap | 38mm | galvanized steel, stainless steel, aluminum | 2mm-5mm |
| dome cap | 40mm | galvanized steel, stainless steel, aluminum | 2mm-5mm |
| dome cap | 50mm | galvanized steel, stainless steel, aluminum | 2mm-5mm |
 |
|||
Technical Data Of The Peel & Press Insulation Hangers:
Foam Density: 182 kg/m3
Liner Release Value: 10N/m
Peel Adhesion(23℃): 20 N/25mm
Application Temperature: +10℃ - Advisory
Static Shear: >1000 Hrs(PSTC)
Service Temperature(Minimum): -35℃
Service Temperature(Maximum): +90℃
Tensile Strength: (L)113 N/m2 (CNS10487)(C)85N/m2
Elongation: (L)170% (CNS 10487) (C) 150%
Shelf Life: 2years (20℃ 65%RH)
Application Of The Peel & Press Insulation Hangers:
|
1. Pins are very sharp and easy go through any insulation. 5. Usage Of The Peel & Press Insulation Hangers: > Peel & press insulation hangers can only be stuck on clean, dry and smooth surface. > Cleaning the surface is recommended, remove any duct, loose paint, oil etc. > Press the base against the cleaning surface. > Impale the insulation over the point of the peel & press insulation hangers. > Secure the insulation with the self locking washers > Bend or remove excess pins |
 |
Huihao Hardware Mesh Product Limited.
|
1. We choose the best quality materials for making insulation fasteners |
  |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.