Stainless Steel Easy Fix Washers 36mm Used To Fasten Tile Backerboards
36mm stainless steel easy fix washers are designed to anchor insulation material to concrete and timber materials, such as:
- Used to aid fixing tile backer board to wooden floors
- Used to aid fixing tile backer board to stud walls
| Attribute | Value |
|---|---|
| Name | 36mm Stainless Steel Easy Fix Washers Used To Fasten Tile Backerboards |
| Surface | polish |
| Material | stainless steel 304 (galvanized steel also available) |
| Diameter | 36mm |
| Application | secure insulation boards to walls or ceilings or floors |
| Thickness | 0.6mm |
| Small Order | support |
| Center Hole | 5mm |
| Samples | support |
| Package Customization | support |
Material: stainless steel | Thickness: 0.6mm | Diameter: 36mm | Center Hole: 5mm
Stainless Fixings Discs Washers: These easy fix washers are made of high-quality stainless steel, heavy duty firm not easily deformed, durable, tile backer board washers are protected from corrosion and anti-wear.
Washers Design: The tile board washers are counter sunk design to allow the screw head to pull into the board, make the screw head more flush with the surface of the washer. This is to maintain the flat board surface ready for easy unhindered application of the subsequent layers, good stability, easy to use and install.
Wide Application: The stainless steel easy fix washers are widely used to insulation boards, tile backer boards, foam slate, gypsum boards, composite boards extruded plates, you can also directly use insulation washers for fix the building board to the frame.
Seamless Installation: These stainless steel easy fix washers can be grip tightly into the surface after secured with the appropriate steel screws. Each washers features perforated surface, which maintains maximum board surface exposure. This allows standard adhesives and plasters to adhere to the board surface, minimizing the risk of surface damage.
- When using these easy fix washers to fix tile backer boards to walls, ceilings, or floors, it is recommended to use 15 washers per 1200 x 600mm board.
- This is only a guide and specifically it's depended on the type, thickness, sub surface and what is to be put onto the board.
- It is the installers responsibility to use the correct number of washers to hold the tile backer board in place.
- 50 pcs/bag, 100 pcs/bag, 200 pcs/bag or as your requirement
- paper carton
- wood pallet
- special package requirement is supported and could be customized
We are a manufacture, located in Hebei province, China.
Yes, the material, the surface finish, the size, all could be customized.
Yes, the package could be customized according to your need.
Yes, we can sell you samples to check the quality.
Yes, our quality is high standard.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.